 |
 |
 |
 |
Pure Water Power 4-Stage RODI & 35 ft Mamba Kevlar Hi-Mod CF Waterfed Pole Package, PWP-PD-3
Purchase The Pure Water Power 4-Stage RODI Cart and a Mamba Kevlar Hi-Mod CF Waterfed Pole as a package and save money. The Pure Water Power 4-stage Cart allows for spot free rinse using only regular tap pressure up to 50 ft. high. This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible. The 4 stages of filtration are as follows: Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon Filter which removes the Chlorine prior to stage-3; which is the Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS). before passing through the final Stage-4 De Ionization (DI) filter which brings the TDS level down to 0. This gives you 100% pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change. This Pure Water Power RODI System produces almost a gallon per minute at heights up to 50 ft with normal incoming pressure of 60 psi from the source. Pure Water Power has delivered a tap water RODI system carefully configured with the most efficient water flow available using only tap pressure and has constructed this unit with all brass fittings, (no plastic parts found on this commercial work horse), and stainless steel RO housing for a professional look and commercial grade quality and ruggedness. If you demand perfection at a better than market price, well this unit is what you want. Capable of producing 2500 GPD at 125 incoming psi. Easily connect to any water source and any waterfed pole. Equipped with standard garden hose fittings in and out. It is more than recommended to use a 5/8" I.D. minimum hose diameter incoming water supply. Anything smaller will restrict the water flow of this system.
Mamba Kevlar Hi-Mod Carbon Fiber Waterfed Poles are Constructed of a superior blend of Hi mod Carbon Fiber and Kevlar. Hi-Mod (Himodulous) Carbon Fiber offers superior rigidity and strength incorporated with a cross weave pattern with Kevlar giving you a very durable and rigid finish, as well as, lightness needed to comfortably work at heights of 45 feet and above. We have tested the rigidity of the Mamba Waterfed Poles with just about every brand on the market today and the Mamba Waterfed Poles have superior rigidity, lightness and strength. All Mamba Waterfed Poles are equipped with one of the strongest Clamping Mechanisms available including aluminum levers for durability and strength.
All Mamba Waterfed Poles are equipped with a 24-Inch short pole that can easily slide out of the pole to clean lower level windows. An adjustable angle gooseneck with an acme thread attachment for scrub pads, 12" dual trim nylon brush with 4-pencil jets, ΒΌ-inch 300 psi rated hose with brass FGH (female garden hose) connection fitting, and high quality, easy to change, Locking Clamp Mechanisms with aluminum levers. Mamba Waterfed Poles are the strongest and most rigid poles available
Note: Waterfed poles are not made to be used with soap. Windows dry spot free with waterfed pole & RO/DI system working together.
Manual
In the winter, keep covered with an insulated blanketIn the summer, it can be stored in a hot shed. Both seasons, water needs to be run through the unit ever 2 weeks on Hurricanes and 3 weeks on the rest. If the filters dry, they are worthless and ruined.
Can two people use at the same time?Yes, if you add a splitter attachment from Home Depot and you have a dual RO or Booster. Can two people use at the same time?
Yes, if you add a splitter attachment from Home Depot and you have a dual RO or Booster.
How should I store this in different seasons?
In the winter, keep covered with an insulated blanketIn the summer, it can be stored in a hot shed. Both seasons, water needs to be run through the unit ever 2 weeks on Hurricanes and 3 weeks on the rest. If the filters try, they are worthless and ruined.
How often do I change the filters?
Carbon & sediment filters should be changed every 6 months & by doing that they take care of the RO membrane which will give them 5 years before they should need to change the RO filter. 20" DI will last anywhere from 8-12 months before it needs to be changed or if they start seeing water spots left on the glass.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
Pure Water Power 4-Stage RODI System Includes:
- 4-Stage Purification
- Powder coated frame
- 40" Stainless RO housing and membrane
- 10" x 2.5" Sediment housing and filter
- 10" x 2.5" Carbon housing and filter
- 20" x 4.5" DI housing and filter
- Sporty Low Profile Flat Free Blue Wheels
- Rubber Hand Grips
- Tds Meter
- 50 ft. 3/8" commercial grade hose w/GH connections
- Stainless Steel RO housing and all brass fittings
- Filter housing wrenches x 2
- All filters included
- QC hoses for easy RO output test
Specs:
- 60 lbs.
- 52" Tall x 18" Wide x 16" Deep
- Can be stored, transported and used flat or upright.
- Steel Swivel Compression fittings on all rubber hoses within system.
- All brass fittings used, no cheesy plastic parts. Commercial quality.
|
|
 |
 |
 |
 |


|