Pure Water Power 4-Stage RODI Water Purification System, Dual RO, 20" DI, PWP-CART-DRO-20SE

For additional information on Pure Water Power poles, click here.

Pure Water Power 4-Stage RODI Water Purification System, Dual RO, 20" DI, PWP-DRO-20

For those of you who want extra water flow without the use of a booster pump. This New Dual (RO) Version is equipped with two 40-Inch (RO) membranes giving you almost twice the water flow as a single (RO) unit and a 20-Inch DI Filter for longer life between filter changes. The Pure Water Power 4-stage Dual (RO) Cart allows for spot free rinse using only regular tap pressure up to and beyond 50 ft. This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible. The 4 stages of filtration are as follows: Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon Filter which removes the Chlorine prior to stage-3; which is the Dual Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS). before passing through the final Stage-4 De Ionization (DI) filter which brings the TDS level down to 0.

This gives you 100% pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change. This Pure Water Power Dual RODI System produces almost 1.1 gpm minute at heights up to and beyond 50 ft with normal incoming pressure of 50 psi from the water source. In fact, you can even operate two poles equipped with 2 or 4 jets each most of the time. This System produces 66 gallons per hour and is capable of operating (1) Water fed pole with a 4 jet brush and rinse bar up to 50 ft. high assuming your incoming pressure is at least 45 psi. If you are in low pressure areas, a booster pump may be necessary to get proper water flow.

Pure Water Power has delivered a tap water Dual RODI system carefully configured with the most efficient water flow available using only tap pressure and has constructed this unit with all brass fittings, (no plastic parts found on this commercial work horse), and stainless steel RO housing for a professional look and commercial grade quality and ruggedness. If you demand perfection at a better than market price, well this unit is what you want. Capable of producing 40000 GPD at 125 incoming psi. Easily connect to any water source and any waterfed pole. Equipped with standard garden hose fittings in and out. It is more than recommended to use a 5/8" I.D. minimum hose diameter incoming water supply. Anything smaller will restrict the water flow of this system.

Available in 3 configurations and upgradable to the dual RO version at any time. Single RO Version, Dual RO Version, 20" DI Version, 10" DI Version.

This Pure Water Power RODI System produces almost .75 gallons per minute with a single RO stystem and 1.4 gpm with the dual RO system with normal incoming pressure of 48 psi from the source. The Single RO version will allow you to operate a single pole up to 50 ft. and the dual RO version will allow you to operate a single pole beyond 50 ft. or operate two poles up to 50 ft. The dual RO produces almost twice the water flow thus allowing you to work in lower than normal incoming pressure locations.

DI Filter Estimated Life Span in Gallons

Supply Water TDS	10" DI Filter Capacity	20" DI Filter Capacity
100	715	14000
150	4767	9,500
200	3575	7,100
250	2860	5,700
300	2400	4,800
350	2050	4,100
400	1800	3,600
450	1550	3,100
500	1200	2,400

The Pure Water Power 4-stage Cart allows for spot free rinse using only regular tap pressure up to 50 ft. high. This system is configured for optimum pure water cleaning and uses 4 types of filtration for the best and most economical total filtration possible. The 4 stages of filtration are as follows: Stage-1 from the incoming water supply is the sediment filter which removes rust and large solids, Stage-2; is the Carbon filter which removes the Chlorine prior to Stage-3; which is the Reverse Osmosis (RO) which removes 98% of the Total Dissolved Solids (TDS) before passing through the final Stage-4; De-Ionization (DI) filter which brings the TDS level down to 0. This gives you 100% pure water for cleaning and rinsing without spotting and provides that level for a much longer time before any filters are required to change.

MANUAL