Home > Carpet Extractors > PSI > 500 PSI >

Sandia Sniper 12 Gallon Carpet Extractor 500 PSI Pump 2 Stage Fan with Hose & Wand Kit 80-2500

Sandia Sniper 12 Gallon Carpet Extractor 500 PSI Pump 2 Stage Fan with Hose & Wand Kit 80-2500
 
Alternative Views:


Sale Price: $2,597.00
Estimated Shipping Cost: Free Shipping Item


Free Shipping
Availability: Direct Ship From Manufacturer
Product Code: 80-2500-H


Add Hose and Wand:


Add Upholstery Tool:


Quantity:
Description Additional Specs Frequently Asked Questions
 
Sandia Sniper 12 Gallon Carpet Extractor 500 PSI Pump 2 Stage Fan with Hose & Wand Kit 80-2500
Sniper Tank Extractor Carpet Cleaner with Heater

Combines a demand-type 500 psi solution Pump and heavy-duty, dual 2 stage vacuum motor system for superior cleaning results and faster drying time. Fully portable, constructed of lightweight rotational molded polyethylene for maximum strength and maneuvers on large rear wheels and 3 inch double ball bearing casters. Large, 12-gallon capacity solution and recovery tank, 12 inch cleaning path and tank overflow protection.

There are two types of vacuum motors available: two stage and three stage vacuum motors. Three stage vacuum motors are more powerful and require 2 cords, when carpet extractors equipped with two stage motors have less power and usually come with one cord. You can do a great job with either one.



Features
  • Heater Heats Solution Up To 205 Degrees
  • Adjustable Pump Pressure 100 to 500 psi
  • 12 Gallon Solution Tank and a 12 Gallon Recover Tank
  • Large Stair Climbing Wheels
  • Top Mounted Control Panel
  • Two Powerful 2-Stage Vacuum Motors, 13, 10 Amp, Dual Stack 1.5 inch tubes
  • 163 inches of Waterlift - 100 cfm air flow
  • 25 foot Solution and Recovery Hose and a Stainless Steel Floor Tool Included (80-0500).
  • 2-25 Foot Power Cords
  • 131 Pounds

Sandia Warranty:

Sandia products have...
• 2-year warranty on all vacuum motors
• 2-year warranty on 100 psi pumps only. 1-year on all other psi pumps
• 90-days on components, parts, tools, and accessories.

Note: This warranty does not cover, and shall not be liable for, defects or failures resulting from
improper, or lack of maintenance, misapplication, misuse, tampering with or substitution of
provided parts. Additionally, this warranty does not cover pump stored in freezing conditions,
pump run for extended time with no water, use of powdered detergent, failure to clean system
regularly with vinegar solution. Filters removed from solution tank. Pumps with inline filters not
cleaned regularly.
Sandia covers up to one (1) year of service labor at the manufacturer’s calculated hourly labor rate/repair
time when performed by a manufacturer-authorized service provider. Ultimately, labor reimbursement costs
are at the discretion of the manufacturer. At no time is the manufacturer responsible for travel time to
complete on-call repairs. After one (1) year, the original retail purchaser is responsible for all labor costs
with no manufacturer reimbursement.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of any other
parts will void warranty. The manufacturer does not reimburse for parts used by client that were not
supplied directly for the machine under warranty.
The client must contact the manufacturer prior to working on or changing out of any parts, etc. Do not
send parts or equipment back to the manufacturer without an RMA Number and approval. No labor will be
paid for, nor parts cost paid for or reimbursed, that have not previously been approved by the manufacturer.
All warranty work must be approved and authorized to qualify, and appropriate warranty procedures must
be followed.
The warranty starts on the purchase date by the original purchaser from an authorized distributor, subject
to proof of purchase. If proof of purchase cannot be identified, the warranty start date is ninety (90) days
after the date of sale to the authorized distributor.


Other People Purchased
Sandia Stainless Steel Dual Jet Wand Kit with 25' Vacuum and Solution Hoses, 80-0500 S-Shaped Stainless Steel Wand 12" Wide 2 Jets for Sandia Sniper 12 Gallon Carpet Extractor 10-0861A Sandia Stainless Steel 4" Wide Upholstery Tool, (Required for Machines with Heat), 10-0501 Vacuum Hose Assembly for Sandia Sniper 12 Gallon Carpet Extractor 80-0503
Sale Price: $360.60

Add Free Shipping
Sale Price: $245.00

Add
Sale Price: $128.56

Add
Sale Price: $65.00

Add
Sandia 80-0500 Stainless Steel Dual Jet Wand Kit with 25' Vacuum and Solution Hoses S-Shaped Stainless Steel Wand 8 Wide for Sandia Sniper Stainless Steel Hand Tool 4 Wide Sandia Sniper Carpet Vacuum Hose Assembly for Sandia Sniper 12 Gallon Carpet
Sandia 25 Ft Solution Hose Assembly with 1/4 in. Female and Male Quick Disconnects for Sandia Sniper 12 Gallon Carpet Extractor #80-0502.
Sale Price: $98.80

Add
25 Foot Solution Hose Assembly with 1/4 in. Female and Male Quick Disconnects for Sandia Sniper 12 Gallon Carpet Extractor #80-0502

Share your knowledge of this product with other customers... Be the first to write a review or ask a question