Running rotary shampoo or bonnet cleaning jobs on a Hydro-Force VersaPro (MH48) floor machine means feeding cleaning solution to the pad as you work, and this 4-gallon shampoo tank is the OEM way to do it. It mounts to the VersaPro and gravity-feeds solution down to the pad driver so carpet cleaning techs and janitorial contractors can agitate, pre-spray, or rotary-shampoo without stopping to hand-pour solution between passes. If your VersaPro currently runs dry-bonnet only, this tank is what adds wet rotary shampoo and encapsulation work to the machine's capability.
Built for
- Rotary shampoo and bonnet cleaning on commercial and residential carpet
- Encapsulation cleaning where controlled solution feed matters more than heavy saturation
- Pre-spray agitation ahead of hot water extraction, for restoration-level soil
- Multi-surface crews already using the VersaPro's interchangeable aprons for tile, grout, and hard floor work who want to add wet carpet service
- Replacing a cracked, leaking, or missing tank on an existing VersaPro/MH48 machine
Use cases
Carpet cleaning companies use this tank to switch a single VersaPro machine between dry bonnet passes and wet rotary shampoo jobs without buying a second machine. Janitorial and building-service contractors use it for scheduled deep-clean rotations on commercial carpet, since the 4-gallon capacity covers a good run of floor before a refill stop. It's also common as a pre-spray agitation tool: techs load it with a diluted pre-spray, work it into heavily soiled traffic lanes, then follow with a truckmount or portable extractor for the rinse.
Does this tank fit any rotary floor machine, or only the VersaPro MH48?
This is a Hydro-Force OEM accessory built specifically for the VersaPro rotary floor machine (model MH48). It is designed to mount to that machine's frame and solution-feed system, so fit on other rotary brands is not guaranteed.
How does the solution actually get from the tank to the carpet?
The tank gravity-feeds cleaning solution down through a release valve to the pad driver as the machine runs, so the operator controls flow with the valve rather than hand-pouring or spraying between passes.
Will the tank over-wet my carpet?
It can, if the release valve is opened too far or the machine is moved too slowly across the carpet. Experienced operators open the valve gradually and keep the machine moving at a steady pace; many techs also use the tank for controlled pre-spray agitation rather than full saturation shampooing to avoid over-wetting.
Can I use this for pre-spray agitation instead of full shampooing?
Yes. A number of carpet cleaning professionals load the tank with diluted pre-spray, agitate heavily soiled areas with the rotary pad, then extract with a separate hot water extraction unit. This combination is generally billed as a restoration-level service rather than standard extraction cleaning.
Is this tank sold with the VersaPro machine or separately?
It's an optional accessory. The VersaPro/MH48 machine is typically sold on its own or with an apron, and this 4-gallon shampoo tank is purchased separately to add wet rotary shampoo capability.
Discount Cleaning Products is an authorized Hydro-Force dealer, and this shampoo tank is genuine OEM stock built for the VersaPro rotary machine, not a generic aftermarket substitute. Our team is US-based and can help confirm fit and compatibility with your existing MH48 setup before you order.
