Airmaster 71591 Commercial, 30" Fan Head Assembly #CA30

The Airmaster 71591 is a 30-inch commercial fan head assembly, cataloged as model CA30. It is the fan itself, shipped with the motor, guard and propeller already assembled, and it is what you order when a mount is already in place and only the head needs replacing, or when you are building a fan around a pedestal, wall bracket, base or ceiling mount bought separately. 71591 is Airmaster's own EDP number.

Specifications

• Catalog model: CA30, 30-inch head assembly
• Supplied as: motor, guard and propeller pre-assembled. No base, pedestal or wall bracket included
• Airflow: 6,100 CFM high / 4,400 CFM medium / 2,700 CFM low
• Speeds: 3, at 1,100 / 800 / 600 RPM
• Motor: Airmaster C-1A, 1/4 HP, 115V, single phase, 3.5 amps, 3 speed
• Motor type: totally enclosed air over (TEAO), ball bearing, 5/8-inch shaft
• Propeller: 3 blades, 30-inch diameter, steel with galvanized finish
• Weight: 48 lb shipping. Ships UPS oversize
• Warranty: 2 years

Mounting

Airmaster sells the mounts for this head separately, including the C-2030W wall and ceiling bracket, pedestals 73101 and 73103, and bases 21165 and 21166. Tilt range depends on which mount you use: 30 degrees up and 15 degrees down on a floor or I-beam mount, 30 up and 50 down on a wall mount, and 0 up to 90 down on a ceiling mount.

Published depth figures for this head conflict between sources, so we do not list a depth. Airmaster does not make an OSHA guard claim for its commercial series, so we do not repeat one here. Discount Cleaning Products is a US-based Airmaster dealer and can quote the matching mount for your installation.