The Aztec Low Rider 070-27-LRS is a 27-inch propane burnisher with an onboard Spray Mist system, built to put a high, even shine on large hard floors while applying cleaner or restorer right at the pad. Its rugged steel body and ultra-low profile slide under racks and fixtures, and propane power delivers the high pad speed needed for serious throughput across retail, schools, and institutional floors.
Built for
Facility managers and floor-care contractors choose the 27-inch Low Rider for high-gloss results across big square footage:
- High-speed burnishing of VCT and polished concrete in large facilities
- Retail, school, and institutional floor maintenance on tight schedules
- Spray-clean and concrete-restoration passes that apply chemical directly through the Spray Mist system
Specifications
- 27-inch pad size for high coverage per pass
- Pad speed around 1,700 rpm; rated up to 33,000 sq ft per hour
- Kawasaki engine, about 20 hp (roughly 15 LPG hp) at 3,600 rpm
- Onboard Spray Mist system for VCT cleaning and concrete restoration
- Ultra-low steel-body profile reaches under racks and fixtures
- Advanced composite polymer pad driver
- 12V key start; regulator and solenoid fuel system with low-oil shutdown
- Steel safety-fill propane tank; about 80 dB sound level
- Engine warranty about 2 years (extended coverage option available)
Getting the best results
Run a propane burnisher safely and get the brightest shine:
- Operate only in well-ventilated areas and follow your facility's carbon-monoxide and air-exchange guidelines.
- Use high-speed pads rated for propane pad speeds, since low-speed buffing pads can shred and mark floors.
- Dial in the Spray Mist so you apply just enough cleaner or restorer to maintain gloss without overusing chemical.
- Maintain the engine on schedule and keep a spare propane cylinder ready to avoid mid-shift downtime.
Frequently asked questions
Do I need special ventilation for a propane burnisher?
Yes. Propane engines produce carbon monoxide, so use the machine only in well-ventilated spaces and follow your facility's air-exchange and CO-monitoring guidelines.
What does the Spray Mist system do?
It applies cleaner or restorer directly at the pad, which reduces chemical use, extends time between strip and seal cycles, and helps remove ground-in dirt and scuffs.
How is propane different from an electric burnisher?
Propane burnishers run at higher pad speeds and cover much more area per hour, which suits large floors; electric units are quieter and cleaner for smaller spaces.
Which pads should I use?
Use high-speed burnishing pads rated for propane pad speeds; low-speed buffing pads are not safe at these RPMs and can degrade quickly.
Why does the low profile matter?
The low steel body slides under racks and fixtures, so crews shine more floor without moving merchandise or hand-finishing edges.
Discount Cleaning Products is an authorized Aztec dealer with US-based customer service to help you spec pads, Spray Mist chemical, and a maintenance program. Reach out if you want help comparing the 21-inch and 27-inch Low Rider models.