Aztec 070-21-LRS LowRider 21-inch Propane Burnisher with Spray Mist
Most floor programs treat cleaning and burnishing as two jobs. A crew sprays a maintainer, works it in, then comes back with a burnisher to bring up the gloss. The LowRider Spray Mist model collapses that into one pass. An onboard system meters cleaner or concrete restorer directly ahead of the pad, so the machine is cleaning and polishing at the same time.
The result that matters to a facility manager is not the pass count, it is the calendar. Because the finish is being cleaned and repaired continuously rather than only burnished, ground-in soil, scuffs and light scratches come out during routine maintenance instead of accumulating until they force a full restoration. That pushes VCT stripping and concrete resealing cycles further apart, which is where the real cost sits.
Built for
- VCT maintenance programs that want spray cleaning and high-speed burnishing in one operation.
- Polished concrete floors maintained with a restorer solution rather than a stripped-and-recoated finish.
- Retail and grocery where the low deck has to reach under racking and the aisles are narrow enough to favor a 21-inch pad.
- Contractors reducing chemical spend who want metered application instead of hand spraying.
How the spray mist system works
The system carries a chemical container on the machine and delivers solution through tubing to a spray nozzle at the deck, driven by an onboard pump. The operator controls application while walking the floor, so chemical goes down evenly and only where the pad is about to work. Compared with pre-spraying an area by hand, this uses less product, avoids over-wetting, and removes the wait between application and burnishing.
Choosing between spray mist and dust control
The LowRider is offered with either a spray mist system or a dust control system. Spray mist is the right choice when the goal is cleaning and restoring the finish as you burnish, which is the usual case on VCT and polished concrete. Dust control is the right choice when the floor is already clean and the priority is capturing burnishing dust. If your program includes both needs, tell us the floor type and the maintenance schedule and we will help you pick.
Standard features
- Ultra-low profile deck for burnishing under racks, displays and fixtures
- Rugged patented solid steel body
- Kawasaki engine with low-oil shutdown and safety regulator fuel system
- Premium catalytic muffler for low CARB and EPA emissions
- 12-volt battery key start
- Adjustable comfort handle with Click-n-Lock throttle cable
- Advanced polymer composite pad driver
- Adjustable back wheels for controlled pad pressure
- Patented airtight floating dust skirt
- Meets US Green Building Council LEED IEQ Credit 3.4 requirements
- Compliant with CE, CARB, EPA and GS-42
- Hand-release pad lock
Specifications
- Pad size: 21 inches
- Pad speed: 2,000 RPM
- Work rating: 25,000 sq. ft. per hour
- Engine: Kawasaki, 3,400 RPM engine speed
- Fuel system: regulator system with low-oil shutdown
- Starter: 12-volt battery key start
- Propane tank: steel safety fill
- Dimensions: 23 in. W x 42 in. L x 28 in. H
- Weight: 190 lbs.
- Sound level: 80-82 dB
- Vibration: less than 2.5 mm
- Deck: steel and cast aluminum; handle: adjustable steel
- Motor warranty: 2 years
Frequently asked questions
What chemical goes in the spray mist system?
A cleaner/maintainer solution for spray cleaning VCT, or a concrete restorer solution for polished concrete restoration. Follow the chemical manufacturer dilution instructions and confirm the product is approved for use in a burnisher spray system.
Does the spray mist system replace scrubbing?
No. It handles daily and weekly maintenance by removing ground-in dirt, scuffs and minor scratches as you burnish. Heavy soil, deep damage and restoration work still call for scrubbing or a full strip and recoat.
Can I run it dry as a normal burnisher?
Yes. The spray system is an addition to a standard LowRider burnisher, so the machine burnishes conventionally when the spray is not in use.
Will this work on polished concrete as well as VCT?
Yes. The LowRider Spray Mist is specified for both vinyl composite tile and polished concrete. The difference is the solution you run through it: a cleaner/maintainer on VCT, a concrete restorer on polished concrete.
How does this compare with the 24-inch spray mist model?
Same system, wider pad. The 24-inch covers more ground per pass and is rated 28,000 sq. ft. per hour versus 25,000 for this 21-inch. Choose the 21-inch when aisle width and fixture density matter more than raw coverage.
Discount Cleaning Products is an authorized dealer for the commercial cleaning brands we carry, with US-based support from people who work with this equipment every day. If you are unsure which part or configuration fits your machine, send us your model and serial number and we will confirm the correct item before you order.
