When a jobsite floods or a pit needs to be emptied fast, the BE TP-3065HR moves serious water without choking on the debris that comes with it. This 3-inch semi-trash pump pushes up to 264 gallons per minute and passes solids up to 5/8-inch, so contractors, rental yards, and facility crews can dewater excavations, drain ponds and pools, and transfer dirty water with one rugged, Honda-powered unit.
It is built for the people who cannot wait out a problem: construction and excavation contractors, restoration and flood-cleanup crews, farms and ranches, and rental fleets that need a dependable high-volume pump that starts and runs hard.
Where the TP-3065HR earns its keep
- Dewatering foundations, trenches, and excavations after rain or a high water table.
- Draining ponds, pools, retention basins, and flooded basements quickly.
- Transferring muddy or debris-laden water on construction and agricultural sites.
- Flood and storm cleanup where reliable, high-volume pumping is critical.
- Rental fleets that need a tough, easy-starting pump customers cannot break.
Why pros pick a semi-trash pump
A standard clean-water pump clogs the moment it meets sand or leaves. The TP-3065HR uses an aluminum pump housing with a cast iron impeller and a self-priming design to keep moving water that carries small solids, so crews spend time pumping instead of clearing jams. The Honda GX200 engine adds the easy starting, long service life, and parts availability that make Honda the default choice on a working jobsite.
Specifications
- Flow rate: up to 264 GPM
- Ports: 3-inch NPT inlet and outlet
- Engine: Honda GX200, 196cc, about 6.5 HP, recoil start, low-oil alert
- Maximum solids: 5/8-inch
- Suction lift: about 26 feet; total head: about 85 feet
- Maximum pressure: about 36 PSI
- Pump: centrifugal, aluminum housing with cast iron impeller, self-priming
- Includes: suction strainer and hose clamps
- Warranty: 1-year pump, 3-year Honda engine
Frequently asked questions
How much water can the TP-3065HR move?
It pumps up to 264 GPM through 3-inch NPT inlet and outlet ports, making it well suited to fast dewatering and high-volume transfer jobs.
What size solids can it handle?
As a semi-trash pump it passes solids up to 5/8-inch, so it shrugs off the mud, sand, leaves, and small debris that would clog a clean-water transfer pump.
What engine powers it?
A Honda GX200 196cc commercial engine rated around 6.5 HP, with recoil start and a low-oil alert to protect the engine.
How far can it lift and push water?
It offers about 26 feet of suction lift and roughly 85 feet of total head, with a maximum pressure near 36 PSI for moving water across distance or up out of a pit.
What is the warranty?
The pump carries a 1-year warranty and the Honda GX engine is covered by Honda 3-year warranty.
Discount Cleaning Products is an authorized BE Power Equipment dealer, and this pump ships with the full manufacturer warranty backed by US-based customer service. If you are matching a pump to a specific dewatering or transfer job, our team can help you confirm flow and lift requirements before you order.