The BE Pressure 85.205.029 is a complete replacement spray gun and lance assembly with an industrial-grade gun, a 79-inch insulated lance, and quick-connect fittings on both ends. At almost seven feet of reach, this is the wand for work that would otherwise need a ladder: second-story siding, box trucks and trailers, gutters and soffits, agricultural equipment, and large concrete pads where extra standoff keeps the operator dry.
Use Cases
Pressure washing contractors fit the 79-inch lance for house washing and fleet washing, where the reach covers trailer roofs and second-story fascia from the ground. Farms use it on barns and machinery with deep, awkward geometry. It is also the standard upgrade when a machine's original short wand makes the operator work inside the bounce-back zone on flatwork - the longer lance adds standoff distance and keeps overspray off the operator.
Specifications
- Rated for pressure washers up to 4,000 PSI maximum pressure
- 79-inch lance with molded insulated grip
- Industrial-grade trigger gun
- 3/8-inch quick-connect plug on the gun inlet
- 1/4-inch quick-connect coupler on the lance outlet for standard nozzle tips
Frequently Asked Questions
How much reach does the 79-inch wand actually give?
The lance alone is 79 inches - about 6.5 feet. With your arms and the gun, most operators can work surfaces 12 feet and higher from the ground, depending on spray angle.
Will it connect to my existing pressure washer hose?
If your hose ends in a standard 3/8-inch quick-connect coupler, it snaps straight on. The gun inlet is a 3/8-inch QC plug and the lance outlet takes standard 1/4-inch QC nozzle tips.
Is a wand this long hard to control?
There is more leverage on your arms than a short wand, but the molded insulated grip gives a solid second hand-hold, and the added standoff means less trigger time fighting bounce-back on flatwork.
What pressure washers can use this assembly?
Any gas or electric machine up to 4,000 PSI with standard quick-connect fittings. Check your machine's GPM and PSI are within the assembly rating before use.
Discount Cleaning Products is an authorized dealer for this manufacturer, backed by US-based customer service. If you need help confirming fit for your equipment before you order, our team can verify compatibility by model and serial number.
