The BE Pressure 85.216.030 Quick Connect Nozzle is a 15-degree, size 3.0 spray tip built for stripping tough grime off hard, unpainted surfaces. It concentrates more pressure into a narrower fan than a 40-degree tip, making it a common choice for chiseling away caked-on dirt, grease, and algae.
Built for
- Stripping grease, oil, and algae from concrete, asphalt, and masonry
- Removing rust and grime from metal fences, railings, and equipment
- Cleaning driveways, walkways, and unpainted brick or stucco
- Crews who need a stronger chiseling angle than a standard 25 or 40-degree rinse tip
Because the 15-degree angle concentrates pressure into a smaller area than wider tips, it should be kept moving and used with care on softer or painted surfaces, where it can strip coatings or dig into the material if held in one spot too long. The stainless steel tip and brass quick-connect base are color-coded for fast identification and quick tip changes between jobs.
Specifications
- Spray angle: 15 degrees
- Orifice size: 3.0
- Connection: brass quick-connect base fits standard 1/4-inch quick-connect couplers
- Tip material: stainless steel
- Color code: yellow, per standard nozzle color coding
Frequently asked questions
What is a 15-degree nozzle best used for?
A 15-degree tip is suited to stripping tough grease, oil, algae, and grime from concrete, asphalt, brick, and metal surfaces where a stronger, more concentrated spray is needed than a standard rinse tip provides.
Is the 15-degree nozzle safe for painted surfaces or wood?
Use caution. The concentrated spray can strip paint or dig into softer materials if held in one spot too long, so it is generally reserved for hard, unpainted surfaces rather than wood or painted siding.
How should I use a 15-degree nozzle?
Keep the spray gun moving at a consistent angle and distance from the surface, similar to a scraping motion, rather than holding it in one place, which helps avoid gouging or etching the material.
Will this nozzle fit my pressure washer?
It is built with a standard brass quick-connect base that fits most 1/4-inch quick-connect couplers used on BE Pressure and many other pressure washer wands. Confirm your wand uses a quick-connect fitting before ordering.
Discount Cleaning Products is an authorized BE Pressure dealer supplying spray nozzles, wands, and pressure washer equipment backed by US-based customer service.