The BE Pressure PE-4013HWPSGEN is a professional cold-water gas pressure washer built for contractors, fleet washers, and facility crews who need to clean heavy soils all day without babying the machine. Delivering 4,000 PSI at 4.0 GPM, it pairs aggressive stripping power with enough volume to rinse large surfaces quickly, making short work of caked grease, dried mud, paint prep, and stubborn industrial grime.
Built for demanding job sites
This unit is aimed at users who run a pressure washer as a tool of the trade rather than an occasional weekend cleaner. Common applications include:
- Concrete, driveway, and sidewalk cleaning where high PSI lifts embedded dirt and tire marks
- Fleet and heavy-equipment washdown, including degreasing engines, frames, and undercarriages
- Building exteriors, parking structures, and dumpster pads that see grease and traffic film
- Agricultural and construction equipment cleaning between jobs
- Paint and coating surface prep on metal, masonry, and wood
The low-pressure downstream chemical injector lets crews apply detergents and degreasers, then switch back to a high-pressure rinse without stopping work, so cleaning cycles stay fast on large accounts.
Commercial Honda power and a pump built to last
Power comes from a commercial-grade 389cc Honda GX390 engine with a steel gas tank, low-oil shutdown, and pull-start ignition, a combination known for reliable cold starts and long service life under daily use. The engine drives an industrial General EZ4040 triplex pump featuring an oil sight glass, drain plug, EZ start, an adjustable external unloader, external bypass, and the low-pressure chemical injector. A thermal overload relief valve protects the pump from overheating during bypass, and a clear-bowl water filter makes it easy to spot debris before it reaches the pump.
Specifications
- Max pressure: 4,000 PSI
- Max flow: 4.0 GPM
- Engine: Honda GX390, 389cc commercial, steel gas tank, low-oil shutdown, pull start
- Pump: General EZ4040G triplex with external adjustable unloader
- Frame: stainless steel with solid welded foot, threaded axle, bolt-on tires, anti-vibration rubber foot
- Wheels: 13-inch pneumatic tires
- Hose: 50 ft steel wire braided high-pressure hose
- Gun and wand: 5,000 PSI industrial spray gun with 36-inch insulated lance, EZ-grip quick-connect coupler
Shipping restriction
This configuration cannot ship to California. California-compliant alternatives include Kohler and Vanguard powered machines such as B4414KGS, B3465KA, B2565KGS, B4015RCS, B4214KC, BE3365KA, B4414VAAS, B4414VSAS, and B4014KABG.
Frequently asked questions
Is 4,000 PSI too much for concrete and driveways?
No. 4,000 PSI at 4.0 GPM is well suited to concrete, masonry, and equipment. Use a 25 or 40 degree nozzle and keep the tip moving to clean evenly without etching softer surfaces.
Can I run hot water through this machine?
This is a cold-water unit. It is not designed to accept water hotter than the inlet temperature the pump is rated for. For baked-on grease that needs heat, choose a dedicated hot-water pressure washer instead.
What does the chemical injector do?
The downstream low-pressure injector draws detergent or degreaser into the water stream at low pressure, lets it dwell on the surface, and then you rinse at full pressure. It is ideal for soaping vehicles, equipment, and building surfaces before the high-pressure pass.
Why can't this ship to California?
The Honda GX390 engine configuration is not certified for sale in California. The Kohler and Vanguard powered models listed above are the California-compliant options.
Discount Cleaning Products is an authorized BE Pressure dealer, and our US-based team can help you match the right pump, nozzle, and accessory setup to your cleaning application.