The EDCO Upright Drill Stand with Anchor Base converts a hand-held core drill into a stable, stand-mounted rig for accurate vertical core holes in concrete. Built for plumbers, electricians, HVAC installers, and concrete contractors, it anchors to the slab so you can drill straight, repeatable holes for pipe, conduit, and anchor penetrations without fighting the weight and torque of a hand-held drill.
Built for these jobs
- Plumbing and electrical penetrations - drill clean vertical holes for pipe, conduit, and floor drains.
- Anchor and dowel holes - place accurate holes for rebar dowels and equipment anchors.
- Repeatable production drilling - the anchor base and feed handle keep every hole plumb and consistent.
- Operator comfort and control - stand-mounted drilling reduces fatigue and improves accuracy versus hand-holding.
Why the anchored stand works
Made of strong, lightweight aluminum, the stand bolts to the slab through its anchor base for a rigid setup that resists the bit grabbing. A 60mm collar mounts compatible hand-held core drills, two built-in levels help you set the column dead plumb, and a multi-function wrench handle means no extra tools are needed for setup. The feed handle advances the drill smoothly through the 23.9 inches of column travel.
Specifications
- Model: EDCO Upright Drill Stand, Anchor Base (item 97311)
- Construction: Strong lightweight aluminum
- Drill Mount: 60mm collar
- Column Height: 33-1/2 inches (850 mm)
- Column Travel: 23.9 inches (607 mm)
- Maximum Drilling Diameter: 6 inches
- Weight: 20.2 lbs (9.2 kg)
- Features: Two built-in levels; multi-function wrench handle (no other tools needed)
- Note: Special order item, non-returnable
Frequently Asked Questions
What core drill does the 97311 stand fit?
The stand mounts hand-held core drills with a 60mm collar neck, which is a common mounting standard for EDCO and similar hand-held core drills. Confirm your drill's collar diameter is 60mm before ordering.
How large a core can I drill in the stand?
The stand supports core bits up to 6 inches in diameter, with 23.9 inches of column travel for the drilling depth. Match your bit and drill to the job and keep within the drill's and bit's rated capacity.
How is the stand secured for drilling?
It bolts to the slab through its anchor base, which gives a rigid, stable setup that keeps the hole plumb and resists the bit grabbing. Two built-in levels help you set the column dead vertical before you drill.
Do I need extra tools to set it up?
No - the stand includes a multi-function wrench handle, so no other tools are needed for assembly and adjustment. Please note this is a special-order, non-returnable item.
Discount Cleaning Products is an authorized EDCO dealer, and our US-based team can help you confirm core-drill compatibility and bit sizing. This stand is a special-order, non-returnable item.