The EDCO A208 CPM-10 8 Shaft Startup Pak (152-206T, 384 Spacers & 8 Shafts) is the cpm-10 scarifier cutter pack that concrete prep contractors and equipment-rental yards running an EDCO CPM-10 use for concrete contractors prepping a CPM-10 walk-behind scarifier for traffic-line removal. It is built for daily commercial work and pairs purpose-built engineering with the OEM build quality that keeps a unit on a route for years.
Built for
- Concrete contractors prepping a cpm-10 walk-behind scarifier for traffic-line removal.
- Facility crews opening a fresh drum of carbide cutters before a coatings or thin-mil project.
- Rental yards stocking a complete cpm-10 startup kit on the shelf.
Specifications
- Cutters: 152 x 206-T tungsten carbide cutters
- Spacers: 384 spacers
- Shafts: 8 shafts
- Compatible machine: EDCO CPM-10 scarifier
- Use: Removes traffic paint, thin coatings, mil-thick build-up; surface texturing
What you get
- Loads the EDCO CPM-10 with a complete cutter set in one purchase, saving the time of sourcing cutters, spacers and shafts separately.
- Includes 152 carbide-tipped 206-T cutters that bite into concrete, asphalt and traffic-paint coatings.
- Comes with 384 matched spacers so the cutter pattern stays balanced across all 8 shafts.
- Ships with 8 shafts ready to drop into the CPM-10 drum assembly.
- Designed and manufactured by EDCO for the CPM-10 platform.
- Authorized EDCO dealer; includes the EDCO manufacturer warranty.
Frequently asked questions
Which machine does the A208 fit?
The A208 is the startup pack for the EDCO CPM-10 walk-behind scarifier. It is not interchangeable with the smaller CPU drum or the larger Vortex grinder shafts.
Do I need anything else to run the CPM-10?
Once the A208 is installed in the drum, the only consumables are replacement cutters as they wear. The shafts and spacers in the A208 reload as a set.
What surfaces will 206-T cutters handle?
206-T tungsten-carbide cutters are designed for traffic-paint removal, thin-mil coatings and aggressive surface texturing on concrete and asphalt.
How long do the cutters last?
Lifespan depends on aggregate hardness, depth of cut and machine pressure. Most contractors plan to replace cutters by the bag rather than the kit; the A208 is the full set.
Is this the only startup kit option for the CPM-10?
EDCO offers cutter packs in different tooth counts and tip styles. The A208 is the standard 206-T pack; ask us if a different tooth pattern fits your job better.
Discount Cleaning Products is an authorized EDCO dealer. Every unit ships with the standard EDCO manufacturer warranty, and our US-based customer service team is on hand to answer pre-purchase fit and parts questions.