The EDCO 24950 Universal ProCart is the rolling jobsite stand for the BB-14 14-inch masonry block saw. Masonry contractors, hardscape crews, brick and block layers, and rental yards order this cart because it converts a benchtop block saw into a jobsite-ready cutting station that one or two crew members can move room-to-room on a renovation, or unload from a trailer onto a hardscape pour without anyone bending over a low table all day.
Why this cart works: The expandable design is the difference. Set high, the cutting deck is at standing height, which is what a mason wants when production-cutting block. Set low, the same cart works as a ground-level cutting platform on landscaping and paver projects where the work itself is on grade. The water-drain holes mean the deck doesn't pool slurry from wet-cut work, which keeps the operator's footing dry and the deck from rusting. The centered wood block lets the operator make through-cuts without hitting the steel deck, and the side-mount handles position the lifting points for balanced two-person carries up stairs and onto trailer beds.
Specifications
- Compatibility: EDCO BB-14 14-inch masonry saw (gas, electric)
- Table: Universal with water drain holes and centered wood block
- Cutting head: Adjustable, manual or locked in fixed position
- Handles: Side-mount for balanced lifting
- Wrench: 1/4-inch steel arbor wrench included with saw-mounted holder
- Mode: Standing or ground use
Built for these jobs
- Masonry contractors cutting block, brick, and stone on commercial site work.
- Hardscape crews cutting pavers and segmental block at standing or ground height.
- Brick and block masons for production cutting on residential renovation.
- Rental yards as the standard cart sold or rented with the BB-14 masonry saw.
- Concrete crews cutting expansion joints and decorative cuts on small slab work.
Frequently asked questions
Does this fit any 14-inch saw?
The 24950 is engineered for the EDCO BB-14 line. It may fit other 14-inch block saws with similar mounting geometry, but EDCO does not certify universal fit. If you are running another brand, contact us with the saw model before ordering.
Is the saw included?
No. The 24950 is the cart only. The BB-14 saw is sold separately (BB-14 gas / electric / 3-phase variants).
How heavy is the cart?
Heavy enough for jobsite stability, light enough for a two-person lift. Side-mount handles balance the load.
Will it work for wet or dry cutting?
Both. Drain holes in the deck channel water from wet cuts to ground. For dry-cut block, run the saw with EDCO's dust shroud and a HEPA vac for silica compliance.
Can I cut 20-inch block on this?
The cart's table accommodates large-format cuts; the saw's blade and motor decide the maximum cut depth. For full 20-inch slab cuts, EDCO offers a heavier-duty cart - call us if you need a quote on the upgrade.
Why buy from Discount Cleaning Products
We are an authorized EDCO dealer with the 24950 ProCart in stock alongside the BB-14 masonry saws and replacement EDCO masonry blades. Freight quotes available for full-saw-and-cart orders.