The Edco C10309A ALR-2A is a 2-foot air-powered chisel scaler that takes the back-breaking work out of stripping floors and surfaces. Pounding out about 2,500 hits per minute, it peels up tile, adhesive, roofing, coatings, and stubborn build-up that would take hours to remove by hand, so flooring contractors, demolition crews, and restoration teams can clear and prep a substrate fast.
It is made for the trades that live on surface prep: floor-covering installers, concrete and restoration contractors, roofers, and facility maintenance crews who need to strip a surface clean before the next layer goes down.
What it removes
- Ceramic and quarry tile plus the thin-set adhesive underneath.
- Carpet, vinyl, linoleum, and rubber flooring with their glues.
- Roofing materials, fireproofing, waterproofing, and insulation.
- Mastics, paint build-up, coatings, and ice from concrete.
Why pros reach for the ALR-2A
An air chisel scaler turns a slow, knee-destroying scraping job into a standing, high-speed pass. The lightweight aluminum body cuts operator fatigue, the high-strength tubular handle and soft foam grips keep it comfortable through a full day, and the quick-change hardened steel chuck lets a crew swap chisels in seconds to match the material. Backed by shop air, it keeps working as long as the compressor does.
Specifications
- Length: about 24 inches (2 feet)
- Body: lightweight aluminum
- Impact rate: about 2,500 hits per minute
- Removal rate: up to about 200 square feet per hour of 4-inch ceramic tile in standard thin-set
- Air requirement: about 6 to 8 CFM at 90 PSI
- Chuck: quick-change hardened steel, accepts many chisels and tools
- Includes: 4-inch chisel
Frequently asked questions
What does the Edco ALR-2A chisel scaler remove?
It strips tile, carpet and adhesive, roofing materials, fireproofing and waterproofing, linoleum, rubber coatings, insulation, mastics, paint build-up, and ice from concrete and other hard substrates.
How fast does it work?
It delivers about 2,500 hits per minute and can remove up to roughly 200 square feet per hour of 4-inch ceramic tile set in standard thin-set, far faster than hand scraping.
What air supply does it need?
It runs on compressed air at about 6 to 8 CFM at 90 PSI, so size your compressor to keep up with continuous use.
Why choose the aluminum ALR-2A?
The aluminum body keeps it light at about 7.5 pounds for less operator fatigue, while the tubular handle and soft foam grips improve comfort during long removal jobs.
Can it use different chisels and tools?
Yes. The quick-change hardened steel chuck accepts a wide range of chisels and accessories, so one scaler adapts to many surface-prep tasks.
Discount Cleaning Products is an authorized EDCO dealer, and this chisel scaler ships with the full manufacturer warranty backed by US-based customer service. If you are not sure which scaler length or chisel fits your removal job, our team can help you choose before you order.