The Edco Dyma-Crush Double Segment is built for aggressive removal of hard coatings and glue while leaving behind a light, uniform surface texture similar to a shot-blasted floor. Concrete restoration contractors and flooring installers doing surface prep rely on this Magna-Trap tooling accessory when a job calls for fast material removal without an overly rough profile. Its omni-directional double-segment design cuts efficiently in any direction, making it the least invasive of Edco's aggressive tooling options.
Use Cases
- Removing hard coatings from concrete floors ahead of resurfacing or recoating
- Stripping glue and mastic residue left behind by old flooring
- Creating a uniform, shot-blast-like CSP 3 texture that promotes adhesion for new coatings
- Navigating tight spaces and obstacles thanks to omni-directional grinding
- General aggressive surface prep where a less invasive finish than heavier PCD tooling is preferred
Specifications
Edco Dyma-Crush: aggressive grinding. Omni-directional. Ideal for: designed for removal of hard coatings, glue and common coatings. The Crush is the least invasive accessory, providing a lighter, uniform surface texture similar to a shot blast finish.
- Tooling classification: omni-directional, double-segment
- Concrete Surface Profile (CSP) rating: 3
- Compatible with Magna-Trap floor grinders, single and dual-disc models
- Compatible with Magna-Trap Turbo Grinders, 7 inch, 9 inch, and 10 inch models
- Part of Edco's Magna-Trap specialty tooling line
Frequently asked questions
How is the Dyma-Crush different from directional tooling like the Dyma-PCD or Dyma-Arrow?
The Dyma-Crush uses an omni-directional double-segment design, so it grinds effectively no matter which way it moves, while tools like the Dyma-PCD and Dyma-Arrow are directional and cut best in a single pass direction. The Dyma-PCD is built for heavier removal of thick coatings and membranes, and the Dyma-Arrow leaves a smoother CSP 2 finish. The Dyma-Crush sits at a CSP 3 profile, balancing aggressive removal with a lighter, more uniform texture.
What surface finish does the Dyma-Crush leave behind?
It leaves a light, uniform texture similar to a shot blast finish, rated CSP 3, suited to floors headed for a new coating or overlay.
Which Edco grinders is the Dyma-Crush compatible with?
It is designed for use on Magna-Trap floor grinders, including single and dual-disc models, and Magna-Trap Turbo Grinders in 7 inch, 9 inch, and 10 inch sizes.
Is the Dyma-Crush suitable for glue and mastic removal?
Yes. It is engineered to remove hard coatings and glue in the same pass, making it a practical choice for flooring installers clearing old adhesive residue before new flooring goes down.
Is the Dyma-Crush more or less aggressive than other Edco specialty tooling?
It is the least invasive of Edco's aggressive tooling options, giving contractors strong removal power without gouging the surface as deeply as heavier-duty alternatives.
Discount Cleaning Products stocks Edco Magna-Trap tooling accessories like the Dyma-Crush Double Segment for concrete restoration crews and flooring contractors who need dependable surface prep hardware for their grinders.
