On a 30 or 40 year old Electrolux canister, the machine usually outlives the hose. The motor still pulls, the power nozzle still runs, and the thing that has failed is a split hose wall or a dead wire inside it. This is a replacement electric hose assembly for Electrolux canisters that use the Super J style machine connection, with a handle switch and a two-prong receptacle so the power nozzle runs off the hose the way the original did.
Built for
- Owners of metal-body Electrolux canisters whose original hose has cracked, leaks air, or has lost suction at the handle.
- Anyone whose power nozzle stopped running. A broken internal conductor or a failed handle receptacle is far more common than a dead nozzle motor.
- Refurbishers and resellers making a vintage Electrolux usable again without paying genuine-parts prices.
How to tell if this is your hose
Fitment on these machines is decided at the canister end, not by the model name on the lid. Two checks before you order:
- Connection style. This fits canisters with the Super J style hose-to-canister connection. Electrolux used that connection across a long run of machines.
- Machine end material. Metal-body machines take a full metal machine cuff; plastic-body machines use a different end. They are not interchangeable, and this is the single most common reason a replacement hose gets returned.
Handle style is worth confirming too. Electrolux ran a pistol grip for decades before moving to the gas pump grip, and both styles exist for this connection. Steel wands generally pair with the pistol grip and plastic wands with the gas pump grip. Compare the product photo to the handle you have, and if you are not sure, send us your model number and we will check it.
Testing your old hose first
Before replacing anything, confirm the hose is actually the fault. Attach it to the blower end of the machine, run it, cap the far end with your palm, and mist the hose with soapy water. Leaks show up as bubbles along the wall or at the cuffs. If it holds pressure but the power nozzle is dead, the electrical path in the hose is the suspect.
Specifications
- Type: electrified replacement hose assembly, aftermarket
- Connection: Electrolux Super J style canister connection
- Electrical: handle switch with two-prong power nozzle receptacle
- Handle: swivel
This is an aftermarket assembly rather than a genuine Aerus part. Hose length is not published for this item, and it is not rated as crushproof, so neither is claimed here. Confirm the machine-end material and handle style against your vacuum before ordering.
Frequently asked questions
Will my power nozzle run with this hose?
Yes. It is an electric hose with a handle switch and a two-prong receptacle that carries power through to the nozzle.
How do I know it fits my machine?
Check that your canister uses the Super J style hose connection, then check whether your machine end is all metal or partly plastic. Those two things decide fitment, not the model name.
Is it a genuine Aerus Electrolux hose?
No, it is an aftermarket assembly. Genuine Aerus hoses use a suction knob and no handle switch; aftermarket hoses like this one use a switch and a sliding suction vent.
Pistol grip or gas pump handle?
Both handle styles exist for this connection. Match the product photo to your wand type, or send us your model number and we will confirm before you order.
How do I know the hose is the problem and not the vacuum?
Run the hose on the blower port, cap the far end, and mist it with soapy water. Bubbles mean a leak. If it holds air but the nozzle is dead, the wiring inside the hose has failed.
Discount Cleaning Products stocks Electrolux hoses, wands, power nozzle parts and bags alongside each other, so one order can cover the whole repair. Our US-based team will check a model number for you rather than leaving fitment to guesswork.
