Some workplaces need a glove that satisfies a compliance spec and survives a dirty job at the same time. A veterinary clinic, an EMS unit, a mobile detailer who sees customers, a tattoo studio, a shop that does both service work and first aid: all of them need an actual examination-grade glove that does not look or feel clinical. The AMMEX Gloveworks Black Nitrile Examination Glove is built for exactly that overlap. It is an FDA-cleared examination glove at AQL 1.5, a full point stricter than the 2.5 minimum required for exam grade, at 6 mil in the palm and 7 mil at the fingertips. This is the XX-Large size, sold 100 per box and 10 boxes per case.
Built for
- Clinical, dental, veterinary and laboratory work. Where AQL and FDA clearance are procurement requirements rather than preferences.
- Law enforcement, EMS and first responders. Tested to resist permeation by fentanyl for up to 240 minutes under the ASTM D6978 method.
- Automotive service and detailing. Black conceals grease and grime, so a tech still looks presentable at the customer handoff.
- Tattoo and body art studios. Where black gloves are the professional norm and frequent changes are standard hygiene practice.
Why exam grade and why black
AQL, or acceptable quality level, is the pinhole standard. Industrial gloves are typically held to AQL 3.0 to 4.0; examination gloves must meet 2.5 or lower and must be registered with the FDA as a Class I medical device. This glove is tested at AQL 1.5, which means measurably fewer pinholes per batch than a standard exam glove and far fewer than the industrial gloves sitting next to it on the shelf. The black color earns its place in two directions: it conceals grease, dirt and ink so the wearer stays presentable, and it makes light-colored contamination such as powder, dust or residue immediately visible.
Fit and feel
At 6 mil the glove is substantial enough for shop work while keeping the tactile sensitivity clinical and detail work require. It is fully textured for grip, chlorinated for easier donning on damp hands, and finished with a beaded cuff that will not roll. Being nitrile, it protects against punctures, rips and tears better than comparable latex or vinyl, and it carries none of the natural rubber latex proteins that trigger latex allergy.
Specifications
- Grade: nitrile examination glove. AQL 1.5. FDA 510(k) cleared.
- Tested to ASTM D6978-05; resists fentanyl permeation up to 240 minutes.
- Thickness: 6 mil palm (0.15 mm), 7 mil finger (0.18 mm).
- Length: 9.5 inches. Tensile strength 14 MPa.
- Fully textured, chlorinated, beaded cuff. Powder free and latex free.
- Non-sterile, ambidextrous, single use. Color black.
- Size XX-Large. 100 gloves per box, 10 boxes per case.
Frequently asked questions
Is this really a medical-grade glove?
Yes. It is a nitrile examination glove at AQL 1.5 with FDA 510(k) clearance, tested to ASTM D6978-05. By contrast, the industrial nitrile gloves it sits beside on the shelf are AQL 4.0 with no 510(k) and are not intended for medical use.
Is it rated for fentanyl?
It has been tested to resist permeation by fentanyl for up to 240 minutes under the ASTM D6978 method. That is a laboratory permeation result under defined conditions, not an unlimited-exposure guarantee. Follow your agency's protocol for glove changes.
How thick is it?
Six mil at the palm and 7 mil at the fingertips, 9.5 inches long. That is heavier than a typical thin exam glove while keeping enough tactile sensitivity for detail work.
Why choose black instead of blue?
Black conceals grease, dirt and ink so the wearer looks clean in front of a customer, and it makes light-colored contamination immediately visible. The color has no effect on thickness; the 6 mil wall is the spec.
Does it contain powder or latex?
Neither. It is powder-free and latex-free, and it is chlorinated to make donning easier, so it is safe for staff with a natural rubber latex sensitivity.
How many gloves are in a case?
One thousand: 100 gloves per box, 10 boxes per case. This listing is the XX-Large size.
Discount Cleaning Products is an authorized dealer for AMMEX. We stock the professional line year round, our US-based team knows these products from the field rather than from a catalog, and we are happy to help you confirm sizing, grade and the right case quantity for your team before you order.
