ProTeam GoFit 3 Backpack Vacuum with Telescoping Wand and Xover Multi-Surface Tool (107748)
Backpack vacuums earn their place in commercial work for one reason: the machine goes where the operator goes, so there is no upright to drag around chair legs, no canister to reposition, and no stopping every few feet to move the machine past an obstacle. The ProTeam GoFit line is built around that idea, and it adds a four-step FlexFit articulating harness borrowed from hiking-pack design, so the load rides on the hips instead of the shoulders through a full shift. That matters most to the crews who wear a vacuum for several hours a night rather than a few minutes at a time. The 107748 is the 3-quart GoFit 3 with a telescoping wand and the Xover multi-surface floor tool. The telescoping wand is the version to buy when several operators of different heights share the same machine, or when one operator moves between floor work and above-floor detail work in the same shift.
Use cases
Built for:
- Crews where operators of different heights share one machine across shifts
- Mixed carpet and hard-floor routes handled by a single multi-surface head
- Small offices, clinics and classrooms where a 3-quart body turns easily between furniture
- Above-floor work where wand length needs to change during the same pass
- First backpack vacuum for a team moving off uprights
What it does well
A telescoping wand set to the operator's height is the difference between a comfortable shift and a sore back, and it is the reason most crews with mixed operators specify it. The Xover multi-surface floor tool covers carpet and hard floor from one head, so a corridor-to-office route runs without tool changes. The machine itself is the standard corded GoFit platform: 1,296 watts, up to 153 CFM, 91 inches of lift, ProLevel Filtration with HEPA media, rated to capture 99.79% of particles from 0.3 to 5 microns per ASTM F3150, a hinged lid with a single quick-release die-cast aluminum latch, so bag changes take seconds, and the four-step FlexFit harness that moves the load off the shoulders and onto the hips.
Specifications
- Capacity: 3 quarts
- Motor: 1,296 watts, 120 volts
- Airflow: up to 153 CFM; water lift up to 91 inches
- Filtration: ProLevel Filtration System with HEPA media, 99.79% of particles 0.3 to 5 microns (ASTM F3150)
- Harness: four-step FlexFit quick-adjust articulating harness
- Lid: hinged, single quick-release die-cast aluminum latch
- Warranty: 3 years parts, labor and motor; limited lifetime on molded body parts
- Included: telescoping wand and Xover multi-surface floor tool
Frequently asked questions
How far does the telescoping wand adjust?
It adjusts through a range that covers typical operator heights and locks at the chosen length; the point is to set working height per person rather than per machine.
How is this different from the 107747?
Same GoFit 3 machine and same Xover multi-surface tool. The 107747 ships with a two-piece fixed-length wand; the 107748 ships with a telescoping wand.
Is a 3-quart bag too small for a full route?
It depends on soil load. Three quarts is chosen for maneuverability and lower carried weight; routes with heavy soil or very large floors are usually better on the 6 or 10-quart.
Can it be used during occupied hours?
Yes. The corded GoFit machines run in the high 60-decibel range, which is generally acceptable for daytime cleaning in offices and schools.
What is covered by the warranty?
Three years on parts, labor and motor, and a limited lifetime warranty on molded body parts.
Discount Cleaning Products is an authorized ProTeam dealer with US-based product support, genuine ProTeam filters, bags and replacement tools in stock, and staff who work with commercial cleaning crews every day. ProTeam covers the machine with three years on parts, labor and motor and a limited lifetime warranty on molded body parts.
