Home > Pressure Washers >

Hot2Go Hot Link 12V DC #CPHL5DC-Hot Water Heater for Cold Water Pressure Washers, Pressure Washer Not Included Hot-2-Go CPHL5DC

Hot2Go Hot Link 12V DC #CPHL5DC-Hot Water Heater for Cold Water Pressure Washers, Pressure Washer Not Included Hot-2-Go CPHL5DCH
 
Can not ship to Texas
Sale Price: $2,496.60
Estimated Shipping Cost: Free Shipping Item



Product Code: CPHL5DC
Quantity:

Description
 
The Hot Link System allows you the flexibility of using hot water on those stubborn jobs such as grease, gum, or graffiti that require the impact of hot water to get the job done right. It will save you money by getting the job done faster, and you do not have to buy a new pressure washer if you already have a cold water system. Its compact size allows for easy storage when not in use and takes up less room on your truck or trailer. 12 VDC for remote use, hook to the battery on your pressure washer - requires 14-AMP / 12-VDC charging system.

Heating Coil is made out of Schedule 80

This model needs a 12v battery that also has a charging system so the battery doesn't deplete. Yes, typically it is hooked up to the 12v battery on the pressure washer but can alternatively be hooked up to a vehicle's 12v battery system.

"12v DC - Connect to battery on pressure washer (requires 14amp charging system)"

Ship Weight: 234.0 lbs

NOTE: We cannot ship to Texas due to tax restrictions
NOTE: Will NOT work on GPM over 5.5
Note: 2900-3500 WATT GENERATOR REQUIRED. Closer to 3500 watt is preferred.
Note: Pressure washer and Generator is not included.

Data Sheet
Features

  • 12v DC - Connect to battery on pressure washer (requires 14amp charging system)

  • 4350 PSI / 200F / 1 - 5.5 (NO higher) GPM Max Rating
  • Constructed of Corrosion-Resistant Stainless Steel and Powder Coated Steel

  • Connect to any cold water pressure washer up to 4350psi (300bar)

  • 4-Gallon diesel tank & 4-foot jumper hose
  • Redundant safety features include flow switch, pressure relief valve and burst disc

  • Includes 48”, 5000psi, 250F hose to connect Hot Link to existing pressure washer

  • Adjustable thermostat up to 200F
  • Compact Size 29" x 22" x 22"
  • Pressure Washer not Included
  • Diesel fuel usage: 1.75 gallons per hour.
  • Heat rise: at 4gpm @ 100F heat rise, up to 200 F

  • 274,400 Btu input


Share your knowledge of this product with other customers... Be the first to write a review or ask a question