When a hard floor is standing in water after a flood, a leak, or a tile-and-grout cleaning pass, you need a tool that pulls every drop without fighting you across the surface. The HydroForce 14-inch Gekko Wet Vacuum Squeegee Head is the vacuum-only extraction head built for exactly that job, giving professional carpet cleaners and water-damage restoration crews maximum water recovery on tile, sealed concrete, vinyl, and other hard surfaces while gliding smoothly instead of grabbing and stalling.
Use cases
- Flood and water-damage extraction on hard floors, pulling standing water fast during emergency restoration work.
- Tile and grout rinse recovery, sweeping up the wastewater left behind after a high-pressure hard-surface cleaning pass.
- General hard-surface dewatering on sealed concrete, vinyl, stone, and other smooth floors.
- Sparing your carpet wand from wear by handling wet hard-floor work with a dedicated tool instead of a carpet tool.
Specifications
The Wet Vac Squeegee head is ideal for surfaces that need maximum water removal. The squeegee blades permit exceptional recovery without the usual suck-down found on most vacuum squeegee tools. The blades are double-walled for stiffness with an air gap at the ends to prevent suck-down, and side spray guards stop water from splashing out the sides while still allowing air to flow. This is the vacuum-only head (no spray jets), model 1620-2044, with a 1-1/2-inch OD connection that attaches to the Gekko wet vacuum wand.
Frequently asked questions
Does the AR51V have spray jets?
No. The AR51V is the vacuum-only head designed for water extraction. If you need a head with high-pressure spray jets for cleaning, that is the AR51E model instead.
What does this head attach to?
It connects to the Gekko wet vacuum wand by way of a 1-1/2-inch OD connection. The wand is sold separately.
Why do the blades glide so easily compared to other squeegee tools?
The blades are double-walled for stiffness with an air gap at the ends. That design recovers water aggressively yet prevents the suck-down that makes most vacuum squeegee tools hard to push across a wet floor.
What surfaces is it meant for?
It is built for hard surfaces such as tile, grout, sealed concrete, stone, and vinyl that need maximum water removal, including flood and water-restoration cleanup.
Do the side guards interfere with suction?
No. The spray guards on the sides stop water from splashing out while still allowing air to flow, so suction and recovery stay strong.
Discount Cleaning Products is an authorized Hydro-Force dealer with US-based customer service ready to help you match the right Gekko head and wand to your extraction work.
