Spinner tools make quick work of open tile floors - and then leave a dirty three-inch band at every wall, corner, and cove base. The Hydro-Force AR51C Gekko edge, corner, and coving head is built for exactly that band: a 4-inch head that rides tight against walls and into corners, driving a concentrated high-pressure spray where rotary heads cannot reach. For tile and grout contractors, it is the difference between a floor that looks clean and one that is clean to the wall.
Use cases
Tile and grout edge cleaning. Finish the perimeter after a spinner pass on restaurant kitchens, restrooms, and commercial corridors - the areas inspectors look at first.
Cove base and baseboard tile. The coving cover snaps to either side of the head, or comes off entirely, so the spray follows the curve of cove base in one stroke.
Corners and thresholds. The narrow head gets into 90-degree corners, around toilets and fixtures, and along thresholds where grout collects the worst buildup.
Concrete and stone detail work. Use it with any truckmount or high-pressure portable extractor on sealed concrete and natural stone edges.
Specifications
- Model: Hydro-Force AR51C (also listed as 124203 / 1623-2047)
- Cleaning path: 4 inches
- Pressure rating: 2000 PSI
- Jet: single brass 9503 VeeJet, concentrated close-to-surface spray
- Head material: glass-filled nylon
- Coving cover: tool-free, mounts either side or removes completely
- Fits: Gekko wand system; use with truckmounts or high-pressure portables
Frequently asked questions
Do I need the Gekko wand to use this head?
The AR51C is a head for the Gekko wand system - it attaches to the Gekko wand, which supplies solution and vacuum recovery. If you already own the wand, this head adds edge and coving capability to it.
What machines will run it?
Any truckmount or high-pressure portable extractor that delivers up to 2000 PSI. That covers the hard-surface pressure range most tile and grout contractors already run with spinner tools.
Why a single VeeJet instead of multiple jets?
One brass 9503 VeeJet close to the surface concentrates the full pressure into a narrow fan, which is what blasts embedded soil out of grout lines at the edge. Multiple jets spread the same flow thinner.
How does the coving cover work?
It clips on without tools and can sit on either side of the head, redirecting spray to follow cove base profiles. Pop it off for flat edge work along walls.
Discount Cleaning Products is an authorized Hydro-Force dealer with US-based customer service. Pair the AR51C with the Gekko wand and spinner head to cover entire hard-surface jobs, edge to edge, with one tool system.
