This is the replacement DI filter for IPC Eagle 5-Stage RODI carts and single-stage DI carts, built for window cleaning professionals who rely on pure, spot-free water to leave streak-free glass without a squeegee pass. As the final polishing stage after the RO membrane, the DI resin strips out the last dissolved solids so the water sheets off glass and dries spot-free in the sun.
Built for
- IPC Eagle 5-Stage RODI carts, both electric (RODIE) and battery (RODIB) versions
- IPC Eagle single-stage DI carts used for water-fed pole window cleaning
- Crews who need to maintain 0 TDS output for spot-free results
Specifications
On RODI units, change the DI filter approximately every 59 hours of use on the electric (RODIE) version and every 139 hours of use on the battery (RODIB) version. On the single-stage DI cart, the DI sock should be changed after every 4-6 hours of use on average. Hand-held manual tools and filters of this type carry a 90-day warranty against manufacturer defects; wear items such as filters, seals, and hoses are excluded from the equipment's longer warranty terms.
Frequently asked questions
How do I know when the DI filter needs changing?
Watch your TDS meter - once readings start climbing above 0-10 ppm, the resin is exhausted. As a baseline, plan on roughly 59 hours of use for the electric RODIE version and 139 hours for the battery RODIB version between changes.
Is this the same filter for both RODI and DI cart systems?
This filter is the correct replacement for both the IPC Eagle 5-Stage RODI cart and the single-stage DI cart, though single-stage DI sock change intervals are much shorter (every 4-6 hours) than the RODI unit's DI stage.
What happens if I run past the filter's service life?
Spent DI resin stops removing dissolved solids, so your water will no longer be spot-free and glass will dry with mineral spotting - swap the filter as soon as TDS readings rise.
Discount Cleaning Products is an authorized dealer stocking this item for professional cleaning, janitorial, and restoration crews across the US. Our team is US-based and available to help you match the right part or formula to your equipment before you order.