The MK Diamond GX-10 is a 14-inch wet cutting diamond blade for green concrete. Green concrete is concrete cut within hours of placement, while it is still soft and abrasive, and it needs a harder-bonded blade than a cured slab. MK Diamond lists the GX-10 among the recommended green concrete blades for its CX-3 walk-behind saw. Flatwork and jointing crews use it for early-entry and control joint cutting.
Specifications
- Diameter: 14 inches (356 mm)
- Blade width: .110 inch
- Arbor: 1 inch
- Segment height: 10 mm
- Cutting method: wet
- Rim: segmented, laser-welded
- Manufacturer part number: 159620
MK Diamond publishes both GX-10 sizes at the same .110 inch width, unlike its CX-10 and AX-10 lines. No grade is claimed here because MK Diamond's own product page and category index describe the GX-10 differently.
Saw fitment
MK Diamond lists the GX-10 as a recommended green concrete blade for the CX-3 walk-behind saw, which has a 14-inch blade capacity, a 1-inch blade shaft and a 3,600 RPM blade speed. Those figures describe the saw, not a rating for this blade. MK Diamond does not publish a segment count, matrix hardness or a maximum blade RPM for the GX-10. Confirm the arbor size and speed rating of your saw before ordering.
About the brand
MK Diamond has manufactured diamond blades, core bits and masonry saws for the construction and stone trades since 1868. Discount Cleaning Products is an authorized dealer with US-based customer service.
