The MK Diamond MK-1010H is a 10-inch hard-bond segmented grinding head built to take rough concrete surfaces down to a smooth, uniform finish quickly. It is the right pick when the surface is soft: green concrete, asphalt, brick, terrazzo or marble. Ten premium-grade segments with an 8 mm segment height give the head a long working life, and the 4-bolt mount fits floor grinders that use the standard 10-inch 4-bolt plate.
Use Cases
- Grinding green (freshly poured) concrete before coatings or sealers
- Removing high spots and form marks on new slabs
- Smoothing asphalt, brick and terrazzo surfaces
- Marble and terrazzo restoration prep work
- Contractors who stock hard bond for soft materials and soft bond for cured, dense concrete
Specifications
- Model: MK-1010H (MK Diamond part 158181)
- Diameter: 10 in (254 mm)
- Grade: Premium
- Bond: Hard (for softer materials)
- Segments: 10
- Segment height: 8 mm
- Mount: 4-bolt
Frequently asked questions
What is the difference between the MK-1010H and MK-1010S?
The H is a hard-bond head for softer materials such as green concrete, asphalt, brick, terrazzo and marble. The S is a soft-bond head for harder materials such as cured concrete, ceramic tile and stone.
Should I use hard bond or soft bond on cured concrete?
MK Diamond recommends soft bond for grinding cured concrete and hard bond for green concrete and asphalt, so the MK-1010H is best on softer surfaces.
What size and mount does this head have?
It is a 10-inch (254 mm) head with a 4-bolt mount, so it needs a grinder with a matching 4-bolt plate.
How many segments does it have?
The MK-1010H has 10 segments, each 8 mm high. The MK-1020H is the 20-segment version.
Discount Cleaning Products is an authorized MK Diamond dealer and a US-based supplier of floor prep and concrete tooling. Call or message us if you are not sure which bond fits your slab.
