Bricklayers, masonry contractors, and hardscape crews who cut hard-fired clay brick all day know a blade that hesitates costs them time and material. The MK Diamond MK-414D 14" Standard Grade High Speed Blade is built for that exact demand: laser-welded diamond segments engineered to cut through dense, hard brick on high-speed cutoff saws without glazing over, chipping the brick face, or wearing out halfway through a pallet.
Use Cases
- Cutting hard-fired clay brick to length on high-speed gas or electric cutoff saws for wall construction, veneer work, and infill panels.
- Trimming and notching brick around door and window openings, corners, and returns where a clean, chip-free face cut matters.
- Fitting brick around utility penetrations and arches where standard general-purpose blades bog down in dense material.
- Cutting hard pavers and dense masonry units for hardscape and paver installers working alongside brick crews.
- High-volume dry cutting on job sites without a water hookup, where segment durability under heat is critical.
Specifications
- Diameter: 14 in (355 mm)
- Arbor: 1 in
- Segment type: Laser-welded diamond segments, 10 mm segment height
- Cutting method: Dry cutting, built for high-speed cutoff saws
- Rated speed: Up to 5,460 RPM maximum operating speed for 14 in high-speed blades in this class (per MK Diamond blade speed guidelines)
- Material application: Hard, dense brick and similar hard masonry
- Product code: 151391
Frequently asked questions
Is the MK-414D a wet or dry cutting blade?
The MK-414D is designed as a dry-cutting blade for high-speed cutoff saws, which is how most brick crews run it on the job site. Running water over the cut can help control dust on extended cutting sessions, but the blade does not require it to perform.
What saws does the MK-414D fit?
It has a standard 1 in arbor and 14 in diameter, so it fits the high-speed gas and electric cutoff saws commonly used by masons and bricklayers, provided the saw accepts a 14 in blade.
What is the maximum RPM for this blade?
MK Diamond rates 14 in high-speed blades in this class for up to 5,460 RPM maximum operating speed. Always check your saw's specifications and never exceed the blade's rated speed.
Can this blade cut concrete block or pavers, or is it brick-only?
The MK-414D is engineered specifically for hard, dense brick, which is more demanding on a blade than standard block. It will also cut hard pavers and similar dense masonry, though for reinforced concrete or heavy concrete cutting a general-purpose or concrete-specific blade is a better match.
How long do the segments last on hard brick?
Segment life depends on how abrasive the brick is and how the saw is run, but the MK-414D's 10 mm laser-welded segments are built for extended dry-cutting life on hard brick specifically, which wears blades faster than standard clay tile or softer block.
Discount Cleaning Products is an authorized dealer of MK Diamond industrial and janitorial equipment, and every blade we sell ships from US-based inventory backed by our own product support team. If you have questions about matching the MK-414D to your saw or your brick, our team is glad to help before you order.
