The MK-415 is MK Diamond's Supreme Grade continuous-rim tile blade, built with a high rim and a thicker core for high-production work. This is the 10-inch size, MK part number 153495. It is a wet-cutting blade for porcelain and vitreous ceramic tile, bought by tile contractors and fabricators who need straight, fast cuts.
Specifications
- Diameter: 10 inches (254 mm)
- Blade width / kerf: .080 inch
- Arbor: 5/8 inch
- Rim height: 10 mm
- Rim type: continuous rim, super hi-rim
- Grade: Supreme
- Cutting method: wet only
- MK Diamond part number: 153495
What it cuts
MK Diamond specifies the MK-415 for porcelain and vitreous tile. The high rim is what carries the blade through dense porcelain, and the thicker core is what keeps the cut straight on long production runs. MK notes that its stock arbors can be bushed down to smaller sizes and that special arbors are available on request.
Fits
MK Diamond lists the 10-inch 153495 as a recommended blade for the MK-212-4 saw. It will mount on a wet tile saw that accepts a 10-inch blade on a 5/8-inch arbor. Confirm your saw's blade capacity and arbor size before ordering.
Discount Cleaning Products supplies replacement parts and accessories for professional cleaning and surface preparation equipment, with US-based order support.
Use cases
- Porcelain tile installation. Straight production cuts in dense porcelain on a wet saw.
- Vitreous ceramic tile. The material MK Diamond specifies for this blade.
- Tile fabrication shops. Contractors who cut high volumes and want a thicker core to hold a straight line.
Getting the most from the blade
Keep a steady water supply on the blade, feed at a steady rate and let the continuous rim do the cutting. Check that your saw takes a 10-inch blade on a 5/8-inch arbor, and wear eye and hearing protection.
Frequently asked questions
What does the MK-415 cut?
MK Diamond specifies the MK-415 for porcelain and vitreous tile.
Is the MK-415 a wet blade?
Yes. It is a wet-cutting continuous rim blade.
What are the size and arbor of part 153495?
Part 153495 is 10 inches in diameter, .080 inch wide, with a 5/8-inch arbor and a 10 mm rim.
Which saw does MK recommend it for?
MK Diamond lists the 10-inch 153495 as a recommended blade for the MK-212-4 saw.
