The MK Diamond MK-465D 16-inch blade is a premium grade blade for dry cutting asphalt and green (uncured) concrete. MK Diamond lists it with its dry cutting concrete and asphalt blades, which makes it a practical choice for paving, patching and utility crews that cut on sites without a water supply.
This size (part number 154064) is 16 inches (406 mm) across with a .125-inch blade width, a 10mm segment height, a laser-welded construction and a 1-inch arbor.
Built for
- Road and lot repair. Cut asphalt and green (uncured) concrete for patches and joints.
- Dry cutting on site. Make dry cuts where a water supply is not practical.
- Contractor saw fleets. Stock a premium grade 16-inch blade for your flat saw.
- Early-entry work. Cut green concrete soon after it is placed.
Specifications
- Brand: MK Diamond
- Model: MK-465D
- Part number: 154064
- Diameter: 16 inches (406 mm)
- Blade width: .125 inch
- Arbor: 1 inch
- Segment height: 10mm
- Construction: laser-welded segment bond
- Material: asphalt and green concrete
Fit and compatibility
Confirm the arbor size (1 inch), blade guard clearance and horsepower of your saw before ordering. The MK-465D is a dry cutting blade, so match it to a saw that is set up for dry cutting.
Choosing the right blade
Asphalt and green concrete are cut with different blades than cured concrete, and dry cutting calls for a blade made for it. The MK-465D is listed by MK Diamond with its dry cutting concrete and asphalt blades, so it suits sites with no water on hand. Confirm the diameter your guard allows and the 1-inch arbor on your saw, and compare it with MK Diamond wet cutting asphalt blades if your saw has a water feed and you prefer to cut wet.
Getting the most from the blade
Match the blade diameter and arbor to your saw, keep the guard in place, and let the blade do the cutting rather than forcing it through the material. A steady feed rate and the cooling method the maker recommends (water for wet cutting) keep the cut cleaner and help the segments last. Wear eye, hearing and respiratory protection and follow the saw maker and MK Diamond safety guidance.
Frequently asked questions
What is the MK-465D used for?
It is a premium grade blade for dry cutting asphalt and green (uncured) concrete.
What arbor does this blade have?
It has a 1-inch arbor and a .125-inch blade width.
Is it a wet or dry blade?
MK Diamond lists the MK-465D with its dry cutting concrete and asphalt blades.
What size is part 154064?
It is a 16-inch (406 mm) blade with a 10mm segment height.
Discount Cleaning Products is an authorized MK Diamond dealer, and our US-based team can help you match the right blade, arbor, accessory and saw before you order.
