The MK-485D is MK Diamond's Supreme Grade dry-cutting blade for asphalt overlay and green concrete. Part number 152732 is the 14-inch size with a .250-inch core and a 1-inch arbor, so it mounts on a 14-inch saw with a standard 1-inch shaft. It is a laser-welded segmented blade with a 12mm segment height, built for contractors who cut fresh pavement and early-age slabs without a water supply on the saw.
Use cases
- Asphalt overlay and patching. Straight cuts through asphalt surfaces for utility trenches, patch repairs and edge trimming.
- Green concrete saw cutting. Joint cutting in new slabs soon after the pour, the work MK lists this blade family for.
- Dry-cut job sites. Work where running water is impractical, so you can set up the saw and start the cut.
- Replacing a worn blade. A like-for-like swap when a 14-inch .250-inch-core blade has reached the end of its segments.
Specifications
- MK Diamond part number: 152732
- Blade series: MK-485D, Supreme Grade
- Diameter: 14-inch (356mm)
- Core width: .250-inch
- Arbor: 1-inch
- Segment height: 12mm
- Construction: Laser welded segments
- Cutting method: Dry cutting
Fit check
Confirm three things before you order: your saw takes a 14-inch blade, the shaft or flange accepts a 1-inch arbor, and the .250-inch core width suits your blade guard and cut depth. If you are unsure, check the blade size on your saw's data plate.
Frequently asked questions
What does the MK-485D cut?
MK Diamond lists the MK-485D for asphalt overlay and green concrete. It is a Supreme Grade dry-cutting blade.
What arbor size does part 152732 use?
It has a 1-inch arbor. Make sure your saw shaft and blade flanges match before mounting.
Is this a wet or dry blade?
The MK-485D is a dry-cutting blade. Always follow the saw maker's guidance on dust control and operator protection.
How tall are the segments?
The segments are 12mm tall, which sets the working life of the blade before it needs replacing.
Discount Cleaning Products is an authorized MK Diamond dealer, and our US-based team can help you match a blade to your saw, arbor size and cutting material before you order.
