The MK Diamond MK-500 14-inch (356mm) blade is a standard grade, laser-welded blade for cutting cured concrete. Part number 153256 has a .375-inch width and a 1-inch arbor, and it is matched to saws in the 5 to 12 horsepower range.
Laser welding bonds the segments to the steel core, and the 10mm segment height gives you working depth between blade changes. It is a practical choice for contractors who want a dependable concrete blade without stepping up to a high-horsepower professional series.
Use cases
- Cured concrete cutting. Make control cuts and sawn openings in hardened concrete.
- Mid-power saws. Run on saws in the 5 to 12 horsepower range.
- General contracting. Keep a laser-welded concrete blade ready for slab and flatwork.
Specifications
- Brand: MK Diamond
- Model: MK-500 Standard Grade
- Part number: 153256
- Diameter: 14 inches
- Blade width: .375 inch
- Arbor: 1-inch
- Segment height: 10mm
- Horsepower range: 5 to 12 hp
- Construction: Laser welded
Fit and compatibility
Confirm the arbor size, blade guard clearance and horsepower of your saw before ordering (this blade has a 1-inch arbor). MK Diamond can supply additional diameters, widths and special arbors on request.
Getting the most from the blade
Match the blade diameter and arbor to your saw, keep the blade guard in place, and let the blade do the cutting rather than forcing it through the material. Steady feed pressure and, where the blade is designed for wet cutting, a steady water supply keep the cut cleaner and help the blade last. Wear eye, hearing and respiratory protection and follow the saw maker and MK Diamond safety guidance.
Frequently asked questions
What does the MK-500 cut?
It is a standard grade blade for cutting cured concrete.
What horsepower is it for?
The listed horsepower range is 5 to 12 hp.
What arbor and width?
The 14-inch blade has a 1-inch arbor and a .375-inch width.
Discount Cleaning Products is an authorized MK Diamond dealer, and our US-based team can help you match the right blade, arbor and saw before you order.
