The MK-615W 26-inch Premium Grade blade is a wet-cutting diamond blade made for cutting asphalt over concrete. It is a 26-inch (660mm) walk-behind saw size, .187 inch wide with a 1-inch arbor and a 10mm laser-welded segment.
Use cases
- Road and parking-lot cuts where asphalt sits on top of a concrete base
- Utility trench, patch and repair cuts through asphalt overlay on concrete slabs
- Contractors who run a walk-behind saw in the 8 to 20 horsepower range
- Wet sawing jobs where water is available to cool the blade
MK Diamond lists the MK-615W under its wet cutting asphalt blades, and rates the blade for an 8 to 20 horsepower saw. The Premium Grade designation puts it above MK standard grade blades for diamond content and life, and the segment height of 10mm gives you working depth before the blade is spent.
At .187 inch wide it makes a kerf suited to a standard walk-behind saw cut. Check that your saw takes a 26-inch blade with a 1-inch arbor before ordering, and always run the blade with water.
Specifications
- Model: MK Diamond MK-615W Premium Grade Asphalt Over Concrete Blade
- Part number: 156784
- Diameter: 26 inch (660mm)
- Width: .187 inch
- Arbor: 1 inch
- Segment height: 10mm, laser welded
- Horsepower range: 8 - 20 hp
- Use: Wet cutting
Frequently asked questions
What is the MK-615W designed to cut?
It is a Premium Grade wet-cutting blade for asphalt over concrete.
What saw horsepower does it suit?
MK Diamond lists a horsepower range of 8 to 20 hp for the MK-615W.
Is the MK-615W a wet or dry blade?
Wet. MK lists it with its wet cutting asphalt blades, so run it with water.
What arbor does part 156784 use?
A 1-inch arbor, with a .187-inch width and 10mm segment height on the 26-inch blade.
MK Diamond is a trusted US supplier of diamond blades and core bits, and Discount Cleaning Products is an authorized MK Diamond dealer with US-based customer service. If you are matching a product to your equipment, send us the size and arbor you need and we will confirm the right MK part number before you order.
