The MK Diamond MK-7501 is a professional laser-welded blade for sawing cured concrete with hard aggregate and non-abrasive sand. This 24-inch size, MK part number 153305, belongs to the MK-Pro Series, which MK designs and engineers for high horsepower flat saws. If you cut slabs, joints and pavement for a living, it is built to hold a straight line and keep cutting through long production days.
Use cases
- Slab and flatwork sawing. Control joints, saw cuts and full-depth cuts in cured concrete on a walk-behind flat saw.
- Hard-aggregate concrete. Mixes with hard rock and non-abrasive sand, which is the material MK specifies this blade for.
- Contractor and rental fleets. High horsepower flat saws that run all day and need a blade that holds its cut.
Specifications
- Model: MK-7501 (MK-Pro Series)
- Diameter: 24 inches (610 mm)
- Width: .155 inch
- Arbor: 1 inch
- Segment height: 12 mm
- Construction: Laser welded
- MK Diamond part number: 153305
Fit and compatibility
The 153305 mounts on flat saws that take a 24-inch blade on a 1-inch arbor. MK notes that stock arbors can be bushed down and that special arbors are available on request. Always check your saw manual for blade diameter, arbor and maximum rpm before you order.
Getting the most from the blade
Match the blade diameter and arbor to your saw, keep the blade guard in place, and let the blade do the cutting rather than forcing it through the material. Steady feed pressure keeps the cut straight and helps the segments wear evenly. Wear eye, hearing and respiratory protection and follow the saw maker and MK Diamond safety guidance.
Frequently asked questions
What does the MK-7501 cut best?
MK Diamond specifies the MK-7501 for cured concrete made with hard aggregate and non-abrasive sand.
What saw is the MK-7501 designed for?
It is part of the MK-Pro Series, which MK engineers for high horsepower flat saws.
What are the size and arbor of part 153305?
Part 153305 is 24 inches in diameter, .155 inch wide, with a 1-inch arbor and 12 mm segments.
Is undercut protection available?
MK lists vertical insert undercut protection as a special order option on MK-Pro blades.
Discount Cleaning Products is an authorized MK Diamond dealer. Our US-based team can help you match the right blade to your saw before you order.
