The MK-7601W is MK Diamond's Pro diamond blade for green concrete with hard aggregate, made for contractors who saw newly placed concrete before it fully cures. Part number 154098 is the 14-inch (356mm) size with a .145-inch blade width and a 1-inch arbor, so it mounts on the high horsepower flat saws that professional cutting crews already run. It carries 10mm segments for a working life that suits daily production cutting.
Use cases
- Green concrete joints. Cut control joints in freshly placed slabs before random cracking starts.
- Hard aggregate mixes. MK Diamond designs the MK-7601W for green concrete that contains hard aggregate.
- Early-entry timing. Fits crews that need to saw soon after finishing rather than waiting for a full cure.
- Blade replacement. A direct swap for a worn blade of the same diameter, width and 1-inch arbor.
Specifications
- MK Diamond part number: 154098
- Blade series: MK-7601W, Pro
- Diameter: 14-inch (356mm)
- Blade width: .145-inch
- Arbor: 1-inch
- Segment height: 10mm
- Construction: Laser welded
- Undercut protection: Trapezoid undercut protection
- Designed for: green concrete with hard aggregate
Fit and compatibility
Confirm that your flat saw takes a 14-inch blade, that the shaft accepts a 1-inch arbor, and that the .145-inch blade width suits your blade guard and cut depth. MK Diamond designs the MK-Pro Series for high horsepower flat saws, and additional diameters, widths and special arbors are available on request. Check the saw maker's rated speed against the blade before mounting.
Why choose this blade
Flat saw crews buy blades by the job, not by the box, so the right bond and segment matter more than the sticker price. The MK-7601W is part of MK Diamond's MK-Pro Series, which the manufacturer designs and engineers for high horsepower flat saws. Matching the blade to the material, here green concrete with hard aggregate, keeps cutting speed up and keeps the saw from glazing the segments or wearing them out early. Because MK Diamond also offers other diameters, widths and special arbors on request, you can stay with one blade family as your jobs change.
Choosing the right size
Pick the diameter that gives the cut depth you need with the guard and saw you have, then match the blade width to the kerf your job requires. A .145-inch width is the width listed for this 14-inch size, so check it against your cutting specification and guard clearance before you order. If you are replacing a worn blade, compare the diameter, width and arbor with the one coming off the saw.
Getting the most from the blade
Run the blade with a steady water supply as MK Diamond directs, keep the blade guard in place, and let the segments do the cutting instead of forcing the saw through the material. Even feed pressure and a straight line keep the cut clean and help the blade wear evenly. Wear eye, hearing and respiratory protection and follow the saw maker and MK Diamond safety guidance.
Frequently asked questions
What does the MK-7601W cut?
MK Diamond lists the MK-7601W as a Pro blade for green concrete with hard aggregate.
What arbor does part 154098 use?
It has a 1-inch arbor.
What size is part 154098?
It is 14 inches (356mm) in diameter with a .145-inch blade width and 10mm segments.
How is this blade built?
Segments are laser welded to the core. Trapezoid undercut protection.
Is it for hand-held saws?
No. The MK-Pro Series is designed and engineered for high horsepower flat saws.
Discount Cleaning Products is an authorized MK Diamond dealer, and our US-based team can help you match a blade to your saw, arbor size and cutting material before you order.
