The Hydro-Force Nautilus MX3-200H is a 200 PSI heated portable carpet extractor built for cleaning contractors and facility teams who need hot-water performance in a machine that still fits through a doorway. With a 2,000-watt heater, dual 3-stage vacuum motors, and the hose and wand included, it arrives ready to tackle commercial carpet, apartment turns, and restoration work the day it lands.
Built for
- Carpet cleaning contractors - hot 200 PSI extraction cuts through traffic-lane soil and oils on residential and commercial jobs.
- Property managers and apartment turns - a portable footprint moves unit to unit and up stairs without a truck mount.
- Hospitality and offices - cleans and rinses high-traffic carpet so it dries faster and stays cleaner longer.
- Restoration crews - strong vacuum recovery and switchable motors handle water extraction and drying support.
Switchable dual-motor vacuum system
The MX3-200H's defining feature is a vacuum system you can reconfigure on the fly. Switch the two 3-stage motors from series to parallel in under a minute with no tools or mechanical skill: run series for maximum water lift on long hose pulls and stairwells, or parallel for higher airflow on wide-open floors. That flexibility lets one machine match the job instead of forcing the job to match the machine.
Specifications
- Solution pump: 200 PSI
- Heater: 2,000 W in-line
- Vacuum: two 3-stage motors, series/parallel switchable
- Tank: 12 gal solution and waste
- Body: roto-molded polyethylene
- Dimensions: 42 in H x 34 in L x 23 in W; Weight: approx. 123 lb
- Wheels: 12-inch rear wheels, 5-inch casters
- Included: hose, wand, two 25-foot extension cords, AH224 2-inch Flash Cuff starter, AH201 2-inch to 1.5-inch reducer
Frequently asked questions
What can the Nautilus MX3-200H clean?
The 200 PSI heated extractor is built for commercial carpet and upholstery cleaning - apartment turns, offices, hospitality, and restoration drying jobs where hot solution and strong vacuum recovery matter.
What does the 2,000-watt heater do for cleaning?
The in-line heater raises solution temperature to help dissolve oils and traffic-lane soil faster, so heavily used commercial carpet rinses cleaner and dries with less residue than cold-water extraction.
Can I change the vacuum motor configuration?
Yes. The dual 3-stage vacuum motors can be switched between series and parallel in under a minute with no mechanical skill - series for maximum lift on long hose runs and up stairs, parallel for higher airflow on open floors.
What is included with the MX3-200H?
This configuration ships ready to run with the hose and wand included, plus two 25-foot extension cords, an AH224 2-inch Flash Cuff starter, and an AH201 2-inch to 1.5-inch Flash Cuff reducer.
How big is the tank and the machine?
It carries a 12-gallon solution and waste tank in a roto-molded polyethylene body measuring about 42 in H x 34 in L x 23 in W and weighing roughly 123 lb, with 12-inch rear wheels and 5-inch casters for moving over thresholds.
Discount Cleaning Products is an authorized Hydro-Force dealer with US-based support to help you spec the right extractor, hose length, and tools for your work.
