ProTeam GoFit 3 Backpack Vacuum with ProBlade Carpet Tool Kit (107715)
Backpack vacuums earn their place in commercial work for one reason: the machine goes where the operator goes, so there is no upright to drag around chair legs, no canister to reposition, and no stopping every few feet to move the machine past an obstacle. The ProTeam GoFit line is built around that idea, and it adds a four-step FlexFit articulating harness borrowed from hiking-pack design, so the load rides on the hips instead of the shoulders through a full shift. That matters most to the crews who wear a vacuum for several hours a night rather than a few minutes at a time. The 107715 pairs the 3-quart GoFit 3 with the ProBlade carpet tool kit, which is the configuration to buy when the route is mostly carpeted office, classroom or hospitality space and the operator is a smaller frame or new to wearing a backpack machine.
Use cases
Built for:
- Nightly carpet routes in offices, law firms and classrooms where furniture and cable trays make an upright slow
- Hotel corridors, guest rooms and conference space that need a quiet machine during occupied hours
- Tight retail and back-of-house areas where a 3-quart body is easier to turn than a 6 or 10-quart
- Crews with mixed operator sizes who need the smallest, lightest GoFit body in the line
- Detail work on stairs, upholstery and edges using the crevice, brush and upholstery tools in the kit
What it does well
The ProBlade carpet tool is a non-powered head, so there is no brush roll to jam on string, tape or hair and nothing extra to service. Airflow does the work at up to 153 CFM and 91 inches of water lift, which is what pulls grit out of the pile rather than skimming it off the top. ProLevel Filtration with HEPA media, rated to capture 99.79% of particles from 0.3 to 5 microns per ASTM F3150 keeps that grit in the machine instead of putting it back into the room, which is the difference that gets noticed in schools and medical office buildings. Bag changes run through a hinged lid with a single quick-release die-cast aluminum latch, so bag changes take seconds.
Specifications
- Capacity: 3 quarts
- Motor: 1,296 watts, 120 volts
- Airflow: up to 153 CFM; water lift up to 91 inches
- Filtration: ProLevel Filtration System with HEPA media, 99.79% of particles 0.3 to 5 microns (ASTM F3150)
- Harness: four-step FlexFit quick-adjust articulating harness
- Lid: hinged, single quick-release die-cast aluminum latch
- Warranty: 3 years parts, labor and motor; limited lifetime on molded body parts
- Included kit: ProBlade carpet tool, telescoping wand, 17 inch crevice tool, 3 inch dust brush, 5 inch upholstery tool, filter bags and a 50 ft power cord
Frequently asked questions
Does the ProBlade carpet tool have a motorized brush roll?
No. The ProBlade carpet tool is air-driven with no powered brush roll, so there is no brush to jam or replace. It relies on the vacuum's airflow and lift to lift soil from carpet pile.
What carpet types is the GoFit 3 with the ProBlade carpet kit best on?
It is aimed at commercial low and medium-pile carpet and carpet tile, the surfaces found in offices, schools, hotels and healthcare buildings.
Is the GoFit 3 HEPA filtered?
Yes. The GoFit 3 uses the ProLevel Filtration System with HEPA media, rated to capture 99.79 percent of particles from 0.3 to 5 microns per ASTM F3150.
How big is the 3-quart bag in practice?
Three quarts is the smallest body in the GoFit line. It is chosen for maneuverability and lower carried weight rather than the longest run between bag changes; crews covering very large open floors usually step up to the 6 or 10-quart.
Can I add a hard-surface tool later?
Yes. The GoFit 3 accepts the rest of the ProTeam tool range, including hard-surface and Xover multi-surface tools, so a carpet-first kit can be expanded as the route changes.
Discount Cleaning Products is an authorized ProTeam dealer with US-based product support, genuine ProTeam filters, bags and replacement tools in stock, and staff who work with commercial cleaning crews every day. ProTeam covers the machine with three years on parts, labor and motor and a limited lifetime warranty on molded body parts.
