Carpet gives up its dirt faster when the tool fights for it. The ProTeam 100147 is the 14 inch carpet floor tool with scallops for ProTeam backpack vacuums: the scalloped leading edge agitates and loosens compacted soil from carpet fibers as you work, so the airflow can actually lift it instead of skating over the top. It is the standard production tool for carpeted offices, classrooms, and corridors.
Built for
Backpack vacuum crews covering large carpeted areas on a production schedule. Schools and offices where carpet traffic lanes pack down and need agitation. Replacing a cracked or worn factory carpet tool on any ProTeam backpack. Pairing with a hard surface tool so each floor type gets the right edge.
Specifications
Genuine ProTeam part 100147. Length: 14 inches. Width: 4 inches. Height: 3 inches. Connection diameter: 1.5 inches, fits standard ProTeam wands. Scalloped edge design for carpet agitation.
The 14 inch path covers open carpet fast, and the low 3 inch profile slides under desks, chairs, and tables that force taller tools into detours.
Usage tips
Carpet tools reward technique. Overlapping W-pattern passes with the scalloped edge flat on the carpet lift more soil than straight push-pull lanes, especially in packed traffic areas near doors and printers. Let the tool float on the pile rather than pressing down; excessive pressure seals the airflow channel the scallops create and slows the work. On entry mats and heavily soiled lanes, a slower pass gives the airflow time to evacuate what the scallops loosen. Check the scalloped edge monthly for wear, rounded-over scallops stop agitating and the tool starts gliding, which shows up as carpet that looks vacuumed but still tests dirty. The 1.5 inch connection should fit snug on the wand; a loose fit leaks suction at exactly the wrong point in the airflow path. Most production crews pair this tool with a natural-bristle hard surface tool on the same cart and swap at floor transitions, since the rigid scalloped edge that works carpet will mark a gloss finish if dragged across it.
Why scallops beat smooth edges on carpet
A smooth-edged floor tool relies on suction alone, which works on hard floors where soil sits on the surface. Carpet buries its soil at the base of the pile, so the tool needs mechanical agitation to break it loose first. The scalloped edge does that passively on every stroke: each scallop flexes the carpet face and opens channels for airflow, lifting grit that a smooth tool passes over. That is why scalloped tools remain the standard production carpet tool for backpack vacuums in commercial cleaning, decades after their introduction.
Frequently asked questions
What are the scallops on this floor tool for?
The scalloped edge agitates and loosens compacted dirt from carpet fibers as you push the tool, so the airflow can lift soil that a smooth-edge tool would glide over. It is the standard carpet tool design for backpack vacuums.
Which ProTeam vacuums does the 100147 fit?
It fits ProTeam backpack vacuums and wands with a standard 1.5 inch connection, which covers most ProTeam models including the Super CoachVac, Super QuarterVac, and Super Coach Pro series.
Is this tool for carpet or hard floors?
Carpet. The rigid scalloped edge is made to agitate carpet pile. For tile, laminate, and finished wood, use a hard surface tool with natural fiber bristles instead, so you do not scratch the floor.
How wide is the cleaning path?
14 inches, which covers open carpet areas quickly while still fitting between desks and door frames in commercial spaces.
Discount Cleaning Products is an authorized dealer with US-based customer service. Order online or contact our team for help matching the right part to your equipment.
