When a spot extractor stops pulling water, the machine is usually still fine and the vacuum motor is not. The Sandia 10-0366-SS Super Spotter motor is the upgrade motor for the Sandia 50-4000 3-gallon spotter, and it is the part carpet cleaners and restoration techs order when recovery has gone weak, the motor is screaming, or brushes have finally worn out after years of daily spotting work. Replacing the motor puts the lift back into a machine that already has a good pump, good hoses and a good tank.
Best for these jobs
- Restoring recovery on a 50-4000 that leaves carpet wetter than it used to and extends dry times.
- Replacing a burned-out or brush-worn motor rather than retiring an otherwise healthy spotter.
- Upgrading an older 50-4000 to the Super Spotter motor during a scheduled rebuild.
- Keeping a spare motor on the shelf when a spotter is the only machine covering emergency callbacks.
Specifications
Genuine Sandia replacement vacuum motor. Upgrades spotter model 50-4000 and is part of the 10-0366 motor family alongside 10-0366-A and 10-0366-SS-COM. Installation note from Sandia: this motor requires 1 mount plate (part 10-1024) and 2 washers (part 10-0834). Sandia part number 10-0366-SS.
Sandia warranty
Sandia backs its equipment and OEM parts with a published warranty program: 2 years on all vacuum motors, 2 years on 100 PSI pumps and 1 year on all other pumps, and 90 days on parts, tools and accessories. Sandia also covers up to one year of service labor at the manufacturer calculated hourly labor rate. The warranty does not cover damage from improper or missing maintenance, misapplication, misuse, tampering, or substitution of provided parts.
Frequently asked questions
Which machine does the 10-0366-SS fit?
It is the upgrade vacuum motor for the Sandia 50-4000 3-gallon spot extractor with heat. Sandia lists 10-0366-SS, 10-0366-A and 10-0366-SS-COM as the motor options for that machine.
Do I need any additional parts to install it?
Yes. Sandia specifies 1 mount plate, part number 10-1024, and 2 washers, part number 10-0834, to mount this motor. Order those with the motor so the job is not held up mid-repair.
What is the difference between 10-0366-SS and 10-0366-SS-COM?
The COM suffix in Sandia numbering indicates the motor is supplied complete with its gasket. If you are not sure which one your repair needs, contact us with your model and serial number and we will confirm.
How do I know the motor is the problem and not the hose or tank?
Weak recovery is most often a leak in the vacuum path before it is a dead motor. Check the lid gasket, the recovery tank seal, the hose cuffs and the tool connection first. If the machine still will not hold lift with the hose blocked off, the motor is the likely cause.
What warranty covers this motor?
Sandia publishes a 2-year warranty on vacuum motors, subject to the exclusions in the warranty section above.
Discount Cleaning Products is an authorized Sandia dealer, and we stock genuine Sandia OEM parts rather than look-alike substitutes, so the fit, the electrical rating and the warranty all stay intact. Our US-based team works with these machines every day and can help you match a part number to your model and serial number before you order. If you are rebuilding a machine, ask us about the related wear items that are usually worth replacing at the same time.
