The MK Diamond MK-225 is a Premium Grade thin-rim tile blade, and this 7-inch (178mm) size is built for tile setters and stone fabricators who need clean, straight cuts through dense porcelain and vitreous tile. MK Diamond designs the MK-225 with stiffening and cooling slots that help the blade track straight through hard material instead of wandering.
Built for
- Porcelain tile installation: cut large-format and dense porcelain tile on the job or at the saw.
- Vitreous tile work: trim vitreous tile for floors, walls and showers with a thin kerf.
- Tile shops and remodelers: a 7-inch blade for tile saws and grinders that accept a 5/8-inch arbor.
- Detail cuts: notches, corners and trims where a thin .050-inch blade removes less material.
Thin rim, slotted for straight cuts
MK lists the MK-225 as a thin-rim blade with a 7mm rim height. The thin .050-inch width keeps the cut narrow, and the stiffening and cooling slots are there to help the blade cut straight through dense porcelain. The MK-225 family runs from 4 inches to 14 inches, so you can standardize on one blade design across a shop with different tile saws and grinders.
This listing is the 7-inch blade with a 5/8-inch arbor. Confirm that your saw accepts a 5/8-inch arbor and a 7-inch blade, and follow the saw maker and blade maker instructions for water use, speed and safety equipment.
Specifications
- Manufacturer: MK Diamond
- Model: MK-225, Premium Grade tile blade
- Item number: 158434
- Diameter: 7 inches (178mm)
- Width: .050 inch
- Arbor: 5/8 inch
- Rim: thin rim, 7mm rim height
- Design: stiffening and cooling slots
- Intended material: porcelain and vitreous tile
Frequently asked questions
What does the MK-225 blade cut?
MK Diamond lists the MK-225 as a Premium Grade thin-rim blade for porcelain and vitreous tile.
What arbor does the 7-inch MK-225 use?
The 7-inch MK-225, item 158434, has a 5/8-inch arbor and a .050-inch width.
What are the slots on the blade for?
MK Diamond describes them as stiffening and cooling slots that help the blade cut straight through dense porcelain.
What other sizes does MK-225 come in?
MK Diamond makes the MK-225 from 4 inches up to 14 inches in diameter. Contact us if you need a different size and we will help you match it to your saw.
Discount Cleaning Products is an authorized MK Diamond dealer with US-based customer service. If you are unsure which MK tile blade suits your saw or tile, contact our team before you order.
