The wand is the part of a carpet extractor the operator actually feels, and an S-bend is not styling. The bend puts the handle where a standing adult's wrist naturally sits, which is why a crew can run a 12-inch head through a hotel corridor for a full shift without the forearm fatigue a straight tube produces. The Sandia 10-0861 is the genuine stainless steel dual jet S-bend drag wand listed by Sandia for the Sniper 12-gallon platform and the 1200 psi hard surface extractor.
Two jets rather than one is the other half of the story. A dual jet head lays solution evenly across the full 12-inch path, so soil is released consistently and the recovery slot picks up in one pass instead of two. For a contractor being paid by the square foot, that difference shows up directly in how many rooms get finished before the truck goes home. Stainless steel construction is what keeps the wand serviceable after years of hot water, alkaline prespray, and being thrown in and out of a van.
Built for
- Daily production carpet cleaning in hotels, offices, restaurants, and healthcare corridors
- Open-area work where a 12-inch path finishes rooms faster than a narrow head
- Replacing a bent, leaking, or corroded wand on an existing Sniper 12-gallon extractor
- Outfitting a second machine or a new crew member with a genuine matched wand
- Restoration and post-construction cleanup where recovery in a single pass matters
Specifications
- Manufacturer: Sandia Products
- Part number: 10-0861
- Category: Carpet extractor drag wand
- Overall length: 60 inches
- Head width: 12 inches
- Cleaning path: 12 inches
- Material: Stainless steel
- Color: Silver
- Jets: Dual jet
- Fits: Sandia Sniper 12-gallon and Sniper 1200 psi extractors
- Warranty: Sandia covers parts, tools and accessories for 90 days. Vacuum motors carry a 2-year warranty; 100 psi pumps carry 2 years and all other pumps 1 year. Sandia covers up to one year of service labor at the manufacturer rate through an authorized service center.
The Sandia warranty does not cover failures caused by improper or missing maintenance, misapplication, misuse, tampering, or substitution of supplied parts. It also excludes pumps stored in freezing conditions, pumps run dry for extended periods, use of powdered detergent, failure to flush the system regularly with a vinegar solution, filters removed from the solution tank, and inline filters that are not cleaned regularly.
Frequently asked questions
Which machines does the 10-0861 fit?
Sandia lists the 10-0861 as an accessory for the Sniper 12-gallon extractor series and for the Sniper 1200 psi hard surface extractor. If you are running a different Sandia model or a machine from another brand, send us the model and serial number and we will confirm compatibility.
Why choose a dual jet wand over a single jet?
Two jets spread solution evenly across the full cleaning path, so the carpet is wetted uniformly and the vacuum slot recovers in one pass. A single jet head is lighter and less expensive but usually needs more passes for the same result on soiled commercial carpet.
What does the S-bend actually do?
It positions the handle so the operator can stand upright and push with the shoulders instead of the wrist. Over a full shift that is the difference between a tired crew and an injured one, which is why S-bend wands dominate commercial production work.
How do I keep the jets from clogging?
Use liquid detergent rather than powder, run the recommended inline filters and clean them regularly, and flush the wand with clear water at the end of the day. Sandia's warranty specifically excludes damage from powdered detergent and neglected filters.
Are replacement jets available?
Yes. Jets are a normal wear item on any wand and are sold separately, so a worn or damaged jet does not mean replacing the whole wand.
Discount Cleaning Products is an authorized Sandia dealer, so every part on this page is a genuine Sandia component built to the same tolerances as the one that shipped with your machine. Our US-based team works with these extractors every day and can help you confirm the right part number for your serial number before you order, which is usually faster than pulling the machine apart twice. If you keep a small shelf of wear parts on hand, you spend your day cleaning instead of waiting on a repair.
