A 14-inch scalloped felt floor tool does its job because of the felt, not the housing. When those strips wear down, compress flat or glaze over, the tool stops sealing to the floor - suction drops, fine grit gets pushed along instead of picked up, and crews start going over the same aisle twice. These are the genuine Sandia 10-0340-A replacement blades that bring that tool back to full pickup.
This is a maintenance part for building service contractors and in-house custodial teams running Sandia backpack and hip vacuums over hard floors. Two blades come per pack, which is what it takes to re-felt a tool completely rather than replace one worn side and leave the other. Because felt is soft, it is the right media for delicate and highly polished finishes where a stiff brush or a plastic lip would scuff or dull the shine.
Built for
- Re-felting a 14-inch Sandia scalloped felt hard surface floor tool that has lost suction or started streaking
- Vacuuming polished concrete, VCT, terrazzo and sealed wood where a stiff brush would mar the finish
- Daily custodial routes in schools, offices, retail and healthcare corridors
- Backpack and hip vacuum crews who need consistent edge and corner pickup on wide passes
- Keeping a spare set on the shelf so a route is never run with a worn tool
When to replace the felt
Felt is a wear part, and the tell-tale signs show up before the tool stops working entirely. Watch for a visible height difference between the felt and the tool body, a glazed or hardened surface on the strips, fine dust left in a thin line behind the pass, or a noticeable drop in the pitch of the vacuum as air leaks under a loose seal. Replacing both strips at the same time keeps the tool sitting level on the floor, which is what preserves even suction across the full 14-inch width.
Specifications
- Part number: Sandia 10-0340-A
- Contents: 2 replacement felt blades per pack
- Fits: Sandia 14 in. scalloped felt hard surface floor tool (10-0340)
- Media: felt, suited to delicate and high-polish floor finishes
- Type: genuine Sandia OEM replacement consumable
Sandia covers parts, tools and accessories under a 90-day warranty. Full Sandia warranty terms, including motor and pump coverage and exclusions for improper maintenance, apply as published by the manufacturer.
Frequently asked questions
Which tool do these blades fit?
They are the OEM felt replacement blades for the Sandia 14-inch scalloped felt hard surface floor tool. If you are running a different width or a brush-style tool, this is not the correct part - send us the tool part number and we will identify the right consumable.
How many blades come in a pack?
Two. That is a complete set for one tool, so you can re-felt both sides at once and keep the tool sitting level on the floor.
How often do the felt blades need changing?
It depends on floor abrasiveness and hours run, not a fixed calendar. Replace them when the felt is visibly worn down or glazed, when the tool starts leaving a line of fine dust, or when suction at the floor drops off.
Are felt blades better than a brush strip on hard floors?
On delicate or highly polished finishes, yes - felt glides without scuffing and seals to the floor to maintain airflow. Brush strips are better suited to rougher surfaces where agitation matters more than protecting a shine.
Are these genuine Sandia parts?
Yes. Discount Cleaning Products is an authorized Sandia dealer and this is the factory 10-0340-A consumable, so it fits the tool as designed and keeps you inside Sandia warranty terms on the machine.
Discount Cleaning Products is an authorized dealer for Sandia, so every unit ships as a current factory-spec item backed by the manufacturer warranty. Our US-based staff works with commercial cleaning contractors, restoration crews and facility teams every day, and we can help you confirm compatibility or source the matching consumables and replacement parts before you order.
