A 10-inch steel fan blade turning at over a thousand RPM is not something to have exposed in an occupied building. The Sandia 10-0604 wire finger guard is the barrier that keeps hands, cords and curtain hems out of it. Restoration contractors, school and hospital facility teams and equipment rental fleets order it when a guard has been bent in transit, lost off a machine, or damaged badly enough that the unit cannot be signed off as safe to deploy.
Built for
- Replacing a bent, broken or missing wire finger guard on a Sandia air mover.
- Getting a fleet or rental machine back to a condition that passes a safety inspection.
- Drying work in occupied buildings, schools, healthcare sites and public areas.
- Jobs where machines run unattended overnight and nobody is watching the blade.
Why a guard is a compliance item, not an accessory
Sandia designs its air mover with screens on both the intake and outlet specifically to keep airflow free from debris and protect fingers from the steel fan blades. Once one of those guards is missing, the machine's own safety design is incomplete, and running it in a corridor, classroom or waiting area is a decision somebody has to defend. Most facility managers treat a missing guard as an automatic tag-out, which makes the replacement part the fastest way to get a working machine back into service.
How guards get damaged
Rarely by the fan. Air movers are stacked for storage, thrown in and out of vans, and dragged across thresholds by the cord. Guards get bent when a machine is dropped on its face or when three units are stacked and the bottom one takes the load. Crews that stack their units, as the machine is designed to allow, generally find guards last longer if the stack is limited and the machines are set down rather than tipped.
Specifications
- Manufacturer: Sandia Products (Ultimate Solutions)
- Part number: 10-0604
- Type: Wire finger guard
- Application: Sandia air mover, including the Gen-Air 90-0000 3-speed air mover
- Machine context: 10-inch steel fan blade, 3 speeds at 780, 1000 and 1150 RPM
Sandia's published warranty on the Gen-Air air mover covers a lifetime on the body and one year on the motor and all electrical components.
Frequently asked questions
Is the wire finger guard the same as the intake screen?
No. Sandia lists them as separate parts. The 10-0604 is the wire finger guard and the 10-0603 is the air intake screen. A machine that has taken a knock often needs both.
Which air movers does the 10-0604 fit?
It is listed for the Sandia air mover line, which includes the Gen-Air 90-0000. For an older or private-label machine, send us the model and serial number and we will confirm it against the parts list first.
Can an air mover be run with a damaged guard?
It should not be. Sandia fits guards specifically to protect fingers from the steel fan blades, and most facility and rental operations tag out a machine with a missing or bent guard rather than deploy it.
Why do guards get bent so often?
Handling rather than use. Air movers are stacked, transported and set down hard, and a unit dropped on its face lands on the guard. Limiting stack height and setting machines down rather than tipping them makes guards last noticeably longer.
Discount Cleaning Products is an authorized Sandia Products dealer. We supply genuine Sandia service parts rather than generic look-alikes, and our US-based staff will check the part number against your machine's model, serial number and factory parts list before you order, so a repair part arrives ready to fit.
