EDCO part C10323 is a five-pack of 8-inch shingle remover blades for EDCO ALR-series air-powered chisel scalers. Roofing and demolition crews run these blades to strip asphalt shingles, built-up roofing and similar adhered coverings off a deck far faster than hand scraping. They are a consumable wear item, so working crews typically buy several packs at a time.
Specifications
- EDCO specification number: LR-SR
- Blade width: 8 inches
- Quantity: 5 blades per pack
- Type: shingle remover blade
EDCO does not publish blade material or thickness for this part, so we do not state either.
Fits
C10323 appears in the ALR Accessory Listing of the EDCO Model ALR Chisel Scaler parts manual, which covers the ALR-E, ALR-5, ALR-4 and ALR-2 scalers along with the aluminum ALR-5A, ALR-4A and ALR-2A variants. Confirm fitment against your machine model number before ordering.
EDCO lists a separate part, C10339 (specification LR-SCR), as the shingle remover blade adapter. If your scaler needs the adapter as well as the blades, it is ordered separately.
About the machine
The EDCO ALR chisel scaler is an air-powered scaler running at 80 to 90 PSI working pressure, never to exceed 100 PSI, on a half-inch minimum air hose limited to 30 feet. It uses a quick-change 5/8-inch hex-shank chisel holder. Sound levels exceed 92 dBA, so hearing protection is required. EDCO instructs operators to use only genuine EDCO chisels and accessories.
Discount Cleaning Products is a US-based dealer for EDCO surface preparation equipment and accessories.
