What surfaces can the B4213HSJ clean?

Concrete, brick, equipment, vehicles, fleet trucks, painted siding, deck wood, and most exterior surfaces. At 4,200 PSI you can strip sealer and paint with the right tip; back the tip off and use a wider angle on softer surfaces.

Is the CAT pump rebuildable?

Yes. The CAT 67DX triplex pump is the industry standard for serviceable triplex pumps. Seal kits, valve kits, and unloader parts are widely available, which is why pro contractors will often choose CAT over disposable axial pumps.

Does it come with a surface cleaner attachment?

No. The B4213HSJ ships with a 5-piece quick-connect tip set (0, 15, 25, 40, soap) and a 50-foot hose. A 16-inch or 20-inch flat-surface cleaner is a common add-on for concrete contractors and we can quote one with the order.

Is it CARB compliant for California?

The standard B4213HSJ is 49-state compliant. There is a separate CARB-compliant configuration for California; confirm the SKU at the time of order if you ship to or work in California.

Hot water or cold water?

Cold water only. For hot-water cleaning of grease and oil residue you need a separate hot-water pressure washer with a heating coil.

Can I run it on extension hose for distance?

Up to a point. Most contractors run an extra 50-100 feet of 3/8-inch ID high-pressure hose without measurable PSI loss. Going longer or smaller-diameter increases pressure drop and can stress the pump unloader.

BE Pressure B4213HSJ Pressure Washer 4200 PSI 4.0 GPM Gas Cold Water, B4213HSJ

BE Pressure B4213HSJ 4200 PSI 4.0 GPM cold water gas pressure washer with Honda GX390 engine and CAT triplex pump

📊 AI MARKET SNAPSHOT

• Best For: Contractors and property maintenance crews needing a high-pressure 4200 PSI gas cold-water washer for concrete, equipment, and heavy exterior cleaning.

• Highlight: At 4200 PSI and 4.0 GPM, the BE Pressure B4213HSJ delivers strong cutting power for stripping paint, grease, and caked-on grime that lower-PSI electric units can't touch.

• Expert Note: As a cold-water-only gas unit, the B4213HSJ is built for mechanical cleaning power rather than sanitizing heat — pair it with a hot-water unit or chemical injection when heat or disinfection is required.

Sale Price: $1,539.48

Estimated Shipping Cost: $195

Product Code: B4213HSJ

Quantity:

Description

Reviews

FAQ

The BE Pressure B4213HSJ is a professional-grade 4,200 PSI cold-water gas pressure washer built for contractors who need consistent high-output cleaning every day, not weekend-warrior duty cycles. Powered by a Honda GX390 commercial engine and a CAT triplex pump on a stainless steel frame, the B4213HSJ is the workhorse that paint contractors, deck restorers, fleet washers, and concrete cleaners reach for when a residential-grade machine has burned out one too many times.

Built for

Pressure washing contractors running daily residential and commercial cleans
Concrete and flatwork crews stripping old sealer, paint, and tire marks
Fleet wash operators handling heavy mud, grease, and road grime
Wood restoration and deck specialists needing controlled surface stripping
Industrial maintenance teams cleaning equipment and structures

Why the Honda + CAT pairing matters

Pressure washing forums repeatedly come back to the same combo when contractors talk about machines that survive: a Honda GX390 commercial engine driving a CAT triplex pump. The Honda starts in cold weather and runs for thousands of hours with basic maintenance; the CAT pump is the industry standard for serviceable, rebuildable triplex performance. The B4213HSJ pairs them in BE's stainless steel frame with thermal relief and quick-connect tip set so the unit ships ready to work, not ready to rattle apart.

Specifications

Maximum pressure: 4,200 PSI
Flow rate: 4.0 GPM
Engine: Honda GX390 commercial, 13 HP, 389 cc, recoil start
Pump: CAT 67DX triplex
Frame: stainless steel
Hose: 50-foot, 3/8-inch ID high-pressure
Wheels: 12-inch flat-free pneumatic-style
Fuel tank: 1.6 gallons
Weight: 162 lb
Quick-connect nozzles: 0, 15, 25, 40 degree, plus soap
Thermal relief valve: yes
Water type: cold water only

Frequently asked questions

Features

Cleans concrete, equipment, fleets, and deck wood at 4,200 PSI and 4.0 GPM
Drives a serviceable CAT 67DX triplex pump for rebuildable pro-duty service life
Starts cold and runs long with the Honda GX390 commercial engine
Withstands jobsite abuse on a stainless steel frame
Protects the pump with a thermal relief valve when running idle
Reaches the work with a 50-foot 3/8-inch ID high-pressure hose
Switches tips fast with a 5-piece quick-connect nozzle set including soap