Most of what a restoration crew spends on monitoring is windshield time. A tech drives across town, reads a dehumidifier, writes the numbers on a form, and drives back. The Dri-Eaz Command Hub is the touchscreen controller that turns an i-Series LGR into a unit you can read and adjust from anywhere, and that documents the drying itself while you do other work.
Built for
- Remote job monitoring between site visits. See RH, temperature, GPP and grain depression, change the humidistat or run purge, and get emailed the moment a unit faults.
- Claim documentation. Continuous psychrometric logging exported as a Job Detail PDF, in place of hand-written daily readings.
- Upgrading an existing fleet so older i-Series units match newer Command Hub machines.
- Replacing a failed control panel on a unit already in service.
What it changes on a job
Three things, in order of what crews actually notice. Fewer trips, because power, purge and humidistat are all controllable from the app. Earlier warning, because automatic device error emails go to the assigned job lead and technician on pump or float faults, compressor over-current, sensor failures and Wi-Fi loss, so a dehumidifier that quietly quit on a Friday night does not cost the weekend. And less paperwork, because the 30-point job graph and the one-click Job Detail export are what the adjuster wants to see anyway.
It is worth being straight about what it is not. Remote ambient readings are documentation and triage between visits, not a substitute for a trained technician on site. Ambient temperature and humidity without updated moisture mapping can let you over-dry one area while another stays wet. Used alongside proper mapping, it removes the drives that were never adding information.
Getting set up
The company is registered first on the Command Center Pro web dashboard, not in the mobile app, and users are then added by role as company admin, admin, manager or technician. Plan for that step before handing phones to the crew. Legend Brands also recommends checking units with Command Hub controls for firmware updates regularly, particularly when using the built-in Wi-Fi for remote monitoring.
Specifications
- Part number: 124402-1
- Fits: Revolution LGR, PHD 200, LGR 6000Li, LGR 7000XLi (for LGR 2800i and 3500i use 124507)
- Connectivity: built-in Bluetooth and Wi-Fi
- Display: resistive touch LCD, reliable in damp conditions
- Readings: inlet and outlet temperature, RH, GPP, grain depression, humidistat and purge status
- Logging: performance graph of up to 30 data points since job start
- Humidistat: 30 to 90 percent RH in 5 percent increments
- Counters: compressor cooldown, job hours, life hours, power failure count
- Languages: English, Spanish, French; degrees F or C
- App: Dri-Eaz Command Center Pro for Apple and Android
- Data retention: closed job data retained 90 days, export promptly
Frequently asked questions
Which dehumidifiers does 124402-1 fit?
Legend Brands lists this Command Hub for the Revolution LGR, PHD 200, LGR 6000Li and LGR 7000XLi. For the LGR 2800i and LGR 3500i the part is 124507.
Is there an Android app?
Yes. Dri-Eaz Command Center Pro is available for both Apple and Android devices. Some reseller listings still carry outdated coming-soon-for-Android copy.
Can I add this to a dehumidifier I already own?
It is sold as a retrofit for current i-Series units, and Legend Brands describes integration in under five minutes. Some distributors list it as a control panel service replacement and recommend installation by a service professional, so check with Legend Brands or your distributor if the unit is under warranty.
What can I do from my phone?
View inlet and outlet temperature and relative humidity, GPP, grain depression, job hours, life hours and firmware version; power the unit on or off, run purge, and set the humidistat; and receive automatic device error emails.
What happens if the job site Wi-Fi drops?
The unit keeps running and automatically retries the connection until it is restored, and the system logs a device-disconnected event.
How long is my job data kept?
Export the Job Detail report as soon as a job is closed. Closed job data is retained for 90 days.
Discount Cleaning Products supplies professional cleaning and restoration contractors with genuine parts and accessories. Our US-based team can help you confirm fit before you order.
