The mini emtor is the small Lexan elbow that ties the base of a Kirby to the fill tube inside the cloth outer bag, and it is one of the few parts on the machine that quietly costs you suction when it fails. This replacement mini emtor fits Kirby Heritage II and Legend II uprights and restores a sealed, correctly aligned connection between the blower outlet and the bag, so all the airflow the motor produces actually reaches the dust collection system.
When a mini emtor cracks, warps or loses its gasket, air escapes at the joint. The vacuum sounds normal and the motor is fine, but suction drops and dust puffs out at the connection instead of going into the bag. Because Kirby machines stay in service for decades, this small part is often the difference between a vacuum that performs like new and one that has been slowly leaking for years.
Built for
Owners and repair shops servicing Kirby Heritage II and Legend II uprights. Order it when the emtor is cracked or warped, when dust escapes at the bag connection, or as part of a full refurbishment alongside a new bag and belt.
Use Cases
- Restoring suction lost to a leaking or cracked bag connection on a Heritage II or Legend II
- Stopping dust from puffing out at the joint between the base and the fill tube
- Replacing a warped emtor that no longer seats the outer bag squarely
- Refurbishing a vintage Kirby along with a new outer bag, belt and brush roll
- Keeping a spare on hand in a shop that services older Kirby uprights
Specifications
- Fits: Kirby Heritage II and Legend II uprights
- Part reference: 181185, 181185S
- Material: high-strength Lexan
- Function: connects the vacuum base to the fill tube inside the cloth outer bag
- Model code: 2HD-LGII
- Type: replacement mini emtor assembly
Frequently asked questions
What does the mini emtor actually do?
It connects the base of the Kirby to the fill tube inside the cloth vacuum bag. It is the link that carries dirt from the machine into the bag, so a leak there costs suction and lets dust escape.
How do I know mine has failed?
Look for cracks or warping in the plastic, dust puffing out at the bag connection while vacuuming, or an outer bag that no longer seats squarely. Suction drops even though the motor sounds normal.
Which Kirby models does it fit?
Kirby Heritage II and Legend II uprights, referenced as 2HD-LGII. Check your model badge if you are unsure.
What is it made of?
Lexan, a high-strength polycarbonate chosen because this joint takes constant vibration and handling.
Is this hard to replace?
No. It is one of the easier Kirby repairs. The emtor detaches from the base and the fill tube and the replacement seats in the same position.
Discount Cleaning Products is an authorized dealer for the vacuum, floor care and janitorial brands we stock, with US-based support from people who work on these machines every day. If you are not certain this part matches your model, send us your model and serial number and we will confirm the fit before you order.
