A floor tool with a worn brush is a floor tool that pushes debris instead of collecting it. The bristles round over, the strip no longer reaches the floor evenly, and the operator starts double-passing to get the same result. The Sandia 10-0183-A is the 14-inch replacement nylon brush for Sandia's 10-0183 14-inch floor tool - a consumable, not a repair, and the cheapest way to put a tired tool back into service.
Nylon is the working choice for hard floors that see real traffic. It has enough stiffness to lift grit out of grout lines, floor seams and textured surfaces that a felt or squeegee strip skims over, and it holds that stiffness through repeated cleaning cycles. When it stops doing that, the fix is this strip rather than a new head.
Built for
- Restoring pickup on a Sandia 10-0183 14-inch nylon brush floor tool
- Hard floors with grout lines, seams or texture that trap grit
- Routes where the tool is used nightly and bristles wear on a schedule
- Stocking a spares shelf so a worn brush never takes a tool out of rotation
When to change it
The signal is not a broken bristle - it is a change in behavior. If the crew is going over the same strip twice, if grit is being left in grout lines that used to come clean, or if you can see daylight under the brush when the tool sits flat, the strip is done. Brushes are the wear item in a floor tool by design; the head, neck and cuff normally outlast several sets.
Buying the brush by its own Sandia part number keeps the reorder clean. The 10-0183-A is listed by Sandia specifically as the 14-inch replacement brush for the nylon brush floor tool, so there is no cross-referencing to do at reorder time.
Frequently asked questions
Which tool does the 10-0183-A fit?
Sandia lists it as the 14-inch replacement brush for the 10-0183 14-inch floor tool with nylon brush. Check that your tool is the 10-0183 before ordering.
How do I know the brush needs replacing?
Watch the behavior rather than the bristles. Double-passing the same strip, grit left in grout lines that used to come clean, or visible daylight under the brush when the tool sits flat all mean the strip is worn out.
Why nylon rather than felt or a squeegee blade?
Nylon has the stiffness to reach into grout, seams and floor texture. Felt and squeegee strips are smoother and better suited to sealed or wet surfaces, which is why Sandia offers separate tools for those.
Is replacing the brush worth it versus a new tool?
In most cases yes. The brush is the designed wear item; the head, neck and cuff typically outlast several brush changes.
Discount Cleaning Products is an authorized Sandia Products dealer. Every part is the genuine Sandia item under the manufacturer part number shown, and our US-based team can confirm fitment against the Sandia parts list before you order. If you are not sure which variant your machine takes, call us with the model and we will check it.
