High-pressure work punishes a machine, and the heater is usually the first comfort feature to quit. The Sandia 10-0910-1-5 is the 1200 watt heater specified for 500 psi Sandia extractors -- the units cleaners reach for on heavily soiled commercial carpet, tile and grout, and hard-surface work where pressure does the mechanical job and heat does the chemical one. Solution temperature is what lets a truck-mount-style hot-water rinse happen out of a portable, and when the heat quits the machine still cleans -- just not nearly as well. Replacing the heat components is a routine service job, far cheaper than replacing the extractor.
Built for
- Commercial carpet cleaners running a 500 psi heated Sandia portable.
- Tile and grout contractors who need hot solution behind high-pressure jets.
- Restoration crews cleaning heavily soiled or greasy floors.
- Service technicians keeping high-pressure Sandia heater parts in stock.
What it does
The element heats solution inline as it travels toward the pump and wand, so temperature is available on demand instead of after a tank preheat. Heat matters more, not less, at high pressure: 500 psi jets deliver mechanical energy, but warm solution is what breaks the bond between greasy soil and fiber or grout so that energy has something to flush away. Running a 500 psi machine cold means longer dwell times and heavier chemical use to reach the same result.
Before you replace the element
Inline extractor heaters carry a thermostat at the end of the heater body that can trip and cut power to the element. Technicians on carpet and car-wash trade forums report this as the first thing to check on a no-heat call -- reset the thermostat and the heat often comes straight back. If the machine still runs cold after a reset, and the element reads open on a meter, the element or tube assembly is the part to change.
Sandia builds several heater configurations across the Sniper, Optimizer, Spot-Xtract and Indy lines, and they are not interchangeable. Match the part number on this page to the parts list in your machine's manual, or check the number stamped on the part you are pulling out, before you order.
Specifications
- Manufacturer: Sandia Products
- Part number: 10-0910-1-5
- Type: heater assembly
- Rated wattage: 1200 watts
- Pump pressure application: 500 psi Sandia extractors
Sandia warranty
Sandia Products warrants vacuum motors for 2 years, 100 psi pumps for 2 years and all other pumps for 1 year, and parts, tools and accessories for 90 days. Coverage starts on the purchase date from an authorized distributor with proof of purchase. The warranty does not cover damage from improper or missing maintenance, misuse, tampering, substituted parts, pumps stored in freezing conditions, pumps run dry, powdered detergent, or systems not flushed regularly. Contact the manufacturer for an RMA before returning or replacing any part; unapproved work and non-Sandia parts void coverage.
Frequently asked questions
My extractor stopped heating. Is the element always the problem?
No. Check the thermostat on the inline heater first -- it can trip and cut power without the element failing. Reset it and test. Only replace the element or tube assembly if the machine still runs cold and the element tests open.
How do I know this is the right part for my machine?
Match this part number against the parts list in your Sandia manual or against the number stamped on the component you are removing. Sandia uses different heater assemblies across model lines and wattages, and they do not cross over.
Should a technician install this?
Heater work involves mains voltage and plumbed solution lines. Unplug the machine and let it cool before opening it, and if you are not comfortable working around live electrical connections, have a manufacturer-authorized service provider do the job -- unapproved repairs can affect warranty coverage.
Can I fit this to a 100 psi machine?
No. Sandia lists heater assemblies separately by pump pressure, and this one is specified for 500 psi units. The 100 psi equivalent carries a different part number.
Discount Cleaning Products is an authorized Sandia dealer and stocks Sandia service parts alongside the extractors they belong to. Orders ship from the United States and our support team can help you confirm the right part number against your machine before you buy.
