The Sandia 10-0921 is the aluminum enclosure box for the dual rod heater used in heated Sandia extractors. Dual rod configurations put two heating rods in one assembly to reach working temperature faster, and this box is what holds them in position, contains their heat and covers their electrical connections. Replace it when the box is cracked, warped, corroded or missing after a previous repair.
Built for
- Service techs rebuilding the heater section on a dual rod Sandia extractor.
- Carpet cleaning and auto detail shops repairing their own equipment.
- Dealers and service providers stocking Sandia heat-assembly components.
- Owners restoring a used Sandia machine with parts missing.
What it does
Aluminum is the right material for this job because it conducts heat away from the rods rather than trapping it against nearby plastics, and it survives the vibration a portable extractor takes being loaded into vans and dragged up stairs. The box holds both rods in their designed positions -- rods that shift can contact each other or the housing -- and shields the wiring loom from radiant heat. It also keeps live connections covered, which is not optional on a machine that gets rolled through occupied buildings.
Sandia builds several heater configurations across the Sniper, Optimizer, Spot-Xtract and Indy lines, and they are not interchangeable. Match the part number on this page to the parts list in your machine's manual, or check the number stamped on the part you are pulling out, before you order.
Specifications
- Manufacturer: Sandia Products
- Part number: 10-0921
- Type: aluminum enclosure box for dual rod heater
- Application: heated Sandia extractors using the dual rod heater configuration, including models listing this part in the machine parts breakdown such as the 86-4000-H
- Sold as: housing only. Heater rods, thermostat and wiring are separate part numbers.
Sandia warranty
Sandia Products warrants vacuum motors for 2 years, 100 psi pumps for 2 years and all other pumps for 1 year, and parts, tools and accessories for 90 days. Coverage starts on the purchase date from an authorized distributor with proof of purchase. The warranty does not cover damage from improper or missing maintenance, misuse, tampering, substituted parts, pumps stored in freezing conditions, pumps run dry, powdered detergent, or systems not flushed regularly. Contact the manufacturer for an RMA before returning or replacing any part; unapproved work and non-Sandia parts void coverage.
Frequently asked questions
Does this include the heater rods?
No. The 10-0921 is the aluminum enclosure only. The dual heater rods, thermostat and wiring carry separate Sandia part numbers -- order them with the box if you are rebuilding the full heater section.
Is this the same as the 10-0906 tubular heater box?
No. Sandia lists 10-0906 as the box for the tubular heater configuration and 10-0921 as the aluminum box for the dual rod configuration. They are different parts and are not interchangeable -- check your machine's parts list.
Why aluminum instead of plastic or steel?
Aluminum conducts heat away from the rods instead of trapping it against surrounding plastics and wiring, and it holds its shape through the vibration a portable extractor takes in transport.
Discount Cleaning Products is an authorized Sandia dealer and stocks Sandia service parts alongside the extractors they belong to. Orders ship from the United States and our support team can help you confirm the right part number against your machine before you buy.
