Hoses are the part of a commercial vacuum that fails first, because they get dragged, kinked, stepped on, and yanked around corners every shift. The ProTeam 103623 is the 20 foot, 2 conductor electrified replacement hose for the GoCart Vac, carrying both airflow and power to a motorized brush head, and finished with a swivel end so the hose rotates instead of fighting the operator. It is the part to order when the power nozzle has gone dead but the machine and nozzle are both fine.
Built for
- GoCart Vac units where the power nozzle stopped spinning because of a broken internal conductor
- Preventive replacement of a hose that has begun to crack or split near the connector
- Restoring full reach on a machine running a shortened or patched hose
- Fleet shops keeping a spare hose on hand, since hoses fail more often than motors
Specifications
- Part number: ProTeam 103623
- Type: Electrified vacuum hose assembly, 2 conductor
- Diameter: 1-1/4 inch
- Length: 20 feet
- End: Swivel connector; the replacement swivel elbow cuff is a separate part
- Machine: ProTeam GoCart Vac, where it appears on the manufacturer parts diagram
Fitment note: ProTeam also tags this hose to the QuietPro CN HEPA canister, which suggests broader canister fitment, but that has not been independently corroborated. Confirm against your machine's parts diagram before ordering.
Frequently asked questions
Does this hose include the cuff?
No. The swivel elbow cuff is a separate part number. If your old cuff is cracked or loose, order it at the same time.
How do I tell whether the hose or the nozzle failed?
If suction is normal but the brush will not spin, test the hose conductors for continuity first. A broken wire inside the hose is the more common of the two failures.
Can I repair a broken conductor rather than replace the hose?
Not practically. The wires run embedded along the entire length, so full replacement is the standard repair.
Why does the swivel end matter?
It lets the hose rotate as the operator works instead of twisting up. That reduces both operator fatigue and the twisting stress that eventually splits a hose near the cuff.
Where do these hoses usually fail?
Near the connector ends. That is where the hose flexes most and where cuffs work loose under daily commercial use.
Getting the right part the first time
- Match by part number from your machine's parts diagram or model plate rather than by model name alone. ProTeam has revised most of its machine families more than once, and parts that look identical are often not interchangeable between generations.
- Check the tool connection diameter before ordering anything that attaches to a wand or a hose. The 1-1/4 inch and 1-1/2 inch platforms do not interchange, and mismatched diameter is the most common ordering mistake on ProTeam accessories.
- Unplug the machine, or disconnect the battery on a cordless unit, before beginning any service work on a motor, hose, or filter housing.
- If you are not sure which revision you have, send us the model and serial number from the plate on the machine and we will check it against the current parts diagram for you.
Discount Cleaning Products is an authorized dealer for ProTeam commercial vacuums and genuine ProTeam replacement parts. Our US-based team can help you confirm fitment against your machine's model plate or parts diagram before you order, and we stand behind the parts we sell after the sale. We stock genuine ProTeam parts across the backpack, canister, and cordless lines, and we would rather talk a customer out of the wrong part than ship it and handle the return.
