ProTeam GoFit 3 Backpack Vacuum with Two-Piece Wand and Xover Multi-Surface Tool (107747)
Backpack vacuums earn their place in commercial work for one reason: the machine goes where the operator goes, so there is no upright to drag around chair legs, no canister to reposition, and no stopping every few feet to move the machine past an obstacle. The ProTeam GoFit line is built around that idea, and it adds a four-step FlexFit articulating harness borrowed from hiking-pack design, so the load rides on the hips instead of the shoulders through a full shift. That matters most to the crews who wear a vacuum for several hours a night rather than a few minutes at a time. The 107747 is the 3-quart GoFit 3 built with a two-piece wand instead of a telescoping one and the Xover multi-surface floor tool. Crews choose the two-piece wand for a simple reason: there is no telescoping joint to loosen, slip or collect grit, which matters when a machine is shared across several operators.
Use cases
Built for:
- Shared machines in a crew rotation where the simplest wand survives longest
- Tight commercial interiors: small offices, clinics, dental suites and retail back rooms
- Mixed carpet and hard-floor routes covered by the single Xover multi-surface head
- Buildings where stairs and carrying are part of the route
- Operators who prefer a fixed working length over adjusting a telescoping wand each shift
What it does well
A two-piece wand splits for storage and assembles to one fixed length; nothing slips mid-shift and there is no adjustment collar to service. Paired with the Xover multi-surface head, the operator gets carpet and hard floor from one tool. Underneath, this is the same GoFit platform as the rest of the corded line: a 1,296-watt motor moving up to 153 CFM at 91 inches of lift, ProLevel Filtration with HEPA media, rated to capture 99.79% of particles from 0.3 to 5 microns per ASTM F3150, and a hinged lid with a single quick-release die-cast aluminum latch, so bag changes take seconds. The four-step FlexFit harness carries the machine on the hips.
Specifications
- Capacity: 3 quarts
- Motor: 1,296 watts, 120 volts
- Airflow: up to 153 CFM; water lift up to 91 inches
- Filtration: ProLevel Filtration System with HEPA media, 99.79% of particles 0.3 to 5 microns (ASTM F3150)
- Harness: four-step FlexFit quick-adjust articulating harness
- Lid: hinged, single quick-release die-cast aluminum latch
- Warranty: 3 years parts, labor and motor; limited lifetime on molded body parts
- Included: two-piece wand and Xover multi-surface floor tool
Frequently asked questions
Two-piece wand or telescoping wand, which should I buy?
A telescoping wand adjusts to each operator's height. A two-piece wand has no adjustment joint at all, so it is simpler and has less to wear out on a shared machine. Neither affects cleaning performance.
Does the two-piece wand break down for storage?
Yes. It separates into two sections, which makes it easier to store and transport with the machine.
What surfaces does the Xover tool handle?
It is a multi-surface head designed to cross between commercial carpet and hard floor without a tool change.
Is the GoFit 3 powerful enough for commercial carpet?
Yes. It runs the same 1,296-watt motor, up to 153 CFM and 91 inches of lift, as the larger GoFit bodies; only capacity differs.
What filtration does it use?
ProLevel Filtration with HEPA media, rated at 99.79 percent of particles from 0.3 to 5 microns per ASTM F3150.
Discount Cleaning Products is an authorized ProTeam dealer with US-based product support, genuine ProTeam filters, bags and replacement tools in stock, and staff who work with commercial cleaning crews every day. ProTeam covers the machine with three years on parts, labor and motor and a limited lifetime warranty on molded body parts.
